How to make the puppy bracelet bought in the supermarket into a puppy shape?

How to make a puppy bracelet from a supermarket? Dog owners at home often treat dogs as children, bathe them, cut their nails, talk to them, and some even make small toys for them. For example, this kind of rope-woven toy to be introduced here is just like a bone. Dogs can practice their teeth and sell their legs and feet when they are free.

Note: Students who don't have puppies at home can weave bracelets or key chains in this way.

Materials for weaving ropes:

Two-color polyester rope or umbrella rope, scissors, lighter.

Steps of making homemade puppy toys by rope knitting:

1, use two umbrella ropes to cross each other and lay flat in a cross. The horizontal (gray here) should be under the other one.

Put your finger on the intersection of two ropes.

Put the gray rope, the right end of the midpoint, around your finger and put it on the left, as shown.

Wrap the left end of the original midpoint around your finger and put it on the right, as shown in the figure.

3. Now, the target is a vertical red rope. What we have to do is to change the original upper and lower ends in a different direction, so that the original downward direction should be upward now, and the original upward medicine should be downward.

First, the original downward end turns upward, passes through the gray rope at the bottom of the picture, passes under the gray rope in front, and reaches the top.

Then, the original upward end turns downward, passes through the last gray rope in the picture, goes out from under the next gray rope and reaches the bottom.

4. Carefully take off your fingers and tighten the ropes around.

Straighten and tidy, and you can form such a square knot.

Then, rotate this knot clockwise by 45 degrees and start the above process again. Put your finger at the intersection, turn the horizontal line to cross your finger, turn the vertical line to cross the horizontal line on both sides of your finger, then pull your finger down and tighten it into a knot.

Repeat these steps repeatedly, practice makes perfect, and you will feel very simple. In the process of braiding rope, just hold the braided knot in your hand.

6. When the length reaches your needs, you can start to finish. Don't tighten the last knot,

The edited paragraph faces down and the ending part faces up. As the picture shows, there are still four ropes not tightened. Now, pull the gray rope at the bottom of the graph out of the adjacent right gray ring.

Similarly, the red rope at the bottom of the picture also passes through the adjacent red circle counterclockwise, then the gray circle in the picture, and then the red circle in the picture.

7. After the four ropes are put on respectively, it is like this. Try more, anyway, it is counterclockwise through the adjacent ring of the same color.

8. Each rope is pulled outward. Be sure to tighten it a little.

9. Cut off the excess rope with sharp scissors. Scissors are sharp, so the incision can be neat and not easy to spread.

10, burn it to the bottom with a lighter to melt and fix the rope. That's it. Throw this coward to your dog.