How to add an extra router to a computer?

That is to say, you need to set up a secondary router.

The setting method for connecting a wireless router to another wireless router is as follows:

First, the main router setting method:

1. First, plug the network cable (bus) into the WAN port of the wireless router, plug one end of the network cable into any LAN port of the wireless router, connect one end to the computer network card, and turn on the router power.

2. The computer opens the browser and fills in the address bar of the wireless router:192.168.1.1(marked on the back of the router).

3. Then enter the default account name and password of admin (there are original data prompts behind the router) and click OK.

4. After entering the wireless router setup interface, follow the setup wizard to select the Internet access mode (different broadband access modes are different), and enter the Internet access account and password.

5. Save and continue to set the wireless key. (It is recommended to use a combination of numbers and English for passwords, and it is best to use the @ symbol in the middle to prevent others from surfing the Internet. )

6. After saving, you can surf the Internet normally.

7. If it is not normal, click the reset button of the wireless router, and then set the router.

Second, the secondary router setting method:

1. Do not connect the secondary router to the primary router for the time being.

2. One end of the network cable is connected to any LAN port of the auxiliary router, and the other end is connected to the computer.

3. Change the LAN port IP of the computer browser to192.168.2.1to avoid conflict with the IP network segment of the main router;

4.WAN access mode selection: dynamic IP connection, start DHCP server.

5. Set the account and key wirelessly, save and exit.

6. Connect the network cable from any LAN port of the primary router to the WAN port of the secondary wireless router. At this time, the computer can surf the Internet.