How to clean the hand-held shower head?

1. Remove the shower first, save the parts and pay attention to the installation sequence.

2. Put down the water inlet of the shower and pour out the sundries inside, usually some slag particles in the water inlet pipe, which are easy to block the water outlet.

3. Dredge the rubber water outlet holes one by one with a sewing needle, then pour the water into the shower head, shake it, clean it and then pour it out, so that the inside is fully clean.

4. Clean the scale around and on the surface of the glue hole with a rag, and some need to be scraped clean with nails.

5. Reconnect the clean shower head (shower head) with the outlet hose and tighten it, so that the cleaning work is successfully completed. Open the water valve and try the cleaning effect.