What about the running water in the flue of hot blast stove in grain drying plant?

Water running out of the flue of hot blast stove is a common problem in the drying process, which is usually caused by condensation or water vapor condensation in the flue. The following are some suggestions to deal with the problem of water running in the flue of hot blast stove:

1. cleaning the flue: cleaning the flue regularly is a key step to solve the problem of water running from the flue. Use appropriate tools and methods for cleaning, and remove accumulated water and residues in the flue.

2. Modify the temperature control of the hot blast stove: adjust the temperature control parameters of the hot blast stove to make it stable in a suitable temperature range. Too high or too low temperature will lead to the problem of flue water flow.

3. Check the flue insulation layer: the damage or lack of the flue insulation layer may lead to the problem of water running out of the flue. Check and repair the thermal insulation of the flue to ensure that the surface of the flue is properly insulated.

4. Adjust the combustion conditions: The combustion conditions of the hot blast stove will also have an impact on the flue water problem. Ensure stable combustion conditions, adjust combustion mode and burner parameters, and reduce the generation of water vapor in flue.

5. Regular maintenance and inspection: Maintain and inspect the hot blast stove regularly to maintain the normal operation of the equipment. Find and solve any fault or damage that may lead to flue water problems in time.

It should be noted that the above are just some common solutions, and the specific treatment methods may be different according to the specific situation of the hot blast stove. If you encounter specific problems, it is recommended to seek the help of professional engineers or manufacturers.