Example of manufacturing method and steps of desk storage rack

Although we usually work and study on the desk, we often put some ordinary stationery and books on it, but after long-term use, we will find more or less a lot of odds and ends piled up on it. If we don't take care of it in time, it may make the overall visual appearance less beautiful, and it may also make us spend too much energy and time looking for information and documents in the later stage. What I recommend to you today is the making method of desk storage rack, completely.

1. Manufacturing method of desk storage rack

Desk storage rack made of straw

Once a small straw is put on the rope, it becomes a multi-purpose desk storage rack, which can neatly hang ties, scarves, necklaces and other items, saving space, being convenient to take, adjusting the distance at will and making it simple. Cut the straws into several centimeters, and cut some straws; Tie a knot in the middle of the long ribbon and burn both ends with a lighter to avoid dropping the line; Thread the first straw in the middle of the ribbon with the knot tied on the ribbon as the midpoint. Pick up the second straw and thread the two ends of the ribbon respectively; The third and fourth threads are also worn in this way, and it is not necessary to adjust the length of each ribbon when wearing them. You can adjust all straws together after wearing them. After all straws are put on, tie a knot at the top, hang it up, and pull the bottom straw to adjust the distance between other straws at will. The multifunctional storage rack is ready. Put it on the desk and it becomes a desk storage rack.

Desk storage rack made of shoe box

For the desk storage rack made of shoe boxes, the first step is to add a cover on the core tube, put the core tube on cardboard, make a circle along the mural outside, and then cut it down, cutting eight pieces at a time. Now aim the cover at one end of the core tube and stick it with adhesive tape. Eight covers are glued to eight cores respectively.

Next, the second step of decoration will be carried out. Wrap the shoe box cover with wrapping paper, all three covers should be wrapped, and then wrap the core tube, only the outside, and all eight covers should be wrapped.

The third step of assembly, first take a box cover and dig a hole, which needs to be dug four times. On the four corners, hold the corners with the core tube, and draw the other three corners along a circle in the inner mural. We can dig a hole below. Let's cut the cardboard. First cut out a long strip, wrap it around the core tube, and cut it from the joint line. What we need is such a big cardboard, and we need four pieces. Then stick double-sided tape on the cardboard, roll the adhesive outward, first remove half of the protective layer and insert it into the core tube, then remove the other half of the protective layer and insert it into the hole, and then insert another core tube like this, so that it is glued. The other three are glued together in the same way. Next, we will connect two box covers with the core tube, one as the bottom layer and the other as the top layer. Just stick it with double-sided tape. Look, it's a beautiful desk storage rack now.

From the above example, we can know that although there are many desk storage racks that can be sold to everyone in the market, they can be classified according to different sizes and specifications. In addition, we can further understand that the price of desk storage racks given by these merchants is often relatively high, and the size and specifications may not meet the actual daily needs. Therefore, Bian Xiao's advice to everyone is to combine the materials that can be selected. For example, the above recommendations are two common self-made methods and suggestions for desk storage racks. You can refer to learning to understand.