How to deal with the drum washing machine without drainage

1. Check the drain pipe. First, you need to check the drain pipe of the washing machine. Make sure that the drain pipe is not deformed or twisted. At the same time, make sure that the drainage pipe is unblocked and there is no foreign body blocking it. If so, you can solve it yourself, not that the washing machine is broken. These conditions will make the washing machine unable to drain water.

2. Check the attraction between the circuit and the drain electromagnet. If the above possibility is ruled out, it is necessary to further check the attractive force between the circuit and the drainage electromagnet. Turn the washing machine to single dehydration and start the washing machine. Pay attention to whether the washing machine makes a "bang" sound If yes, it means that the circuit and the drain magnet attract normally.

3. Check the drain valve of the washing machine. It may be that the drain valve of the washing machine is blocked, or the tension spring of the drain valve falls off and breaks. Therefore, damaged parts need to be replaced. If the failure of the controller is caused by the burning of the drainage electromagnet, the controller needs to be overhauled.

4. Check that the power supply voltage of the drainage pump is too low, the drainage pump cannot be started, or the operation is weak, resulting in no drainage or slow drainage. Unplug the plug of the washing machine and measure the power supply voltage with a multimeter. If the voltage is lower than 187V, the drainage pump cannot work normally.

5. Clean up the blockage If the above methods can't solve the problem, it may be that the drain pipe of the washing machine is bent or blocked. You need to put the drain pipe into the floor drain to see if it can flow out. If it can't explain that the drain pipe is blocked, it needs to be cleaned in time.