What can be used to wipe off 502 glue?

1, you can stick 502 with a damp and hot towel. After ten minutes, the cured 502 will be soft and can be removed.

2, with insulating oil, pour the insulating oil in the transformer on the table, 502 glue will soon become soft and can be wiped off quickly.

3. You can drop another drop of 502 where there is 502, and the solidified 502 will become soft, so you can wipe it off with a towel. ?

4. If the conditions are limited, you can soak the stuck part with alcohol (white wine, cooking wine, etc.). ) 1-2 minutes, and scrape it off slowly with scissors.

Extended data

Working principle of 502 glue:

1. Unlike traditional water-based adhesives, cyanoacrylate adhesives are composed of acrylic resin. The main component of cyanoacrylate adhesive is cyanoacrylate, which is an acrylic monomer and will change into a plastic state after curing.

2. Because of its special bonding conditions, cyanoacrylate adhesive is different from traditional adhesive. This means that if the cyanoacrylate glue is placed on a completely dry surface, it will not stick to the surface or form a bond. ?

3. On the contrary, when there is any amount of water, the molecules in the cyanoacrylate glue will react with water and form a tight chain between the two surfaces in contact. This reaction generates heat and occurs immediately, which is different from the traditional bonding by evaporating the base liquid.

Baidu encyclopedia -502