A detailed tutorial on installing monitoring yourself

The detailed tutorial of installing monitoring by yourself is as follows:

Material preparation: pliers, screwdriver, etc.

1. Assemble the camera, install it in the required position, and connect the network cable and power cord. The power supply is 12V DC power supply, which can be centralized or independent. An adapter is installed on the camera to convert 220AC to 12v DC power supply.

2. Connect the host, monitor, camera, switch and power supply.

3. After all the equipment is assembled and connected, power on and start debugging.

Precautions for self-installation monitoring:

1. Do not install surveillance in private areas, such as toilets, bedrooms, dressing rooms, etc. When installing video surveillance in public places, people should be reminded that they have entered the monitoring range.

2. Install the camera in a place that is not easily damaged by the outside world to prevent accidental damage to the equipment. Be careful not to backlight as much as possible, and leave power supply where necessary.

3. Prepare necessary equipment for personal installation of video surveillance, mainly including cameras, DVR digital hard disk recorders, memory cards, monitors, etc. Among them, the camera collects images, the DVR digital hard disk video recorder converts images into data, and the memory card stores data.

4. The basic function of video surveillance is to record and store image information and play back pictures when necessary. Therefore, storage is very important. However, with the long-term use of monitoring equipment, some small problems are constantly emerging, such as audio and video always lose data at critical moments and play back; Ordinary memory cards went on strike after a period of use, and small troubles gradually turned into big troubles, so it is very important to choose memory cards.