How to install and remove the ceiling lamp

The installation and dismantling of ceiling lights are as follows:

Installation:

1. Prepare tools: Installation of ceiling lights requires the preparation of screwdrivers, drills, wire cutters and other tools.

2. Determine the installation position: according to the location where the ceiling light needs to be installed, determine the installation position and use the electric drill to punch holes in the ceiling.

3. Install the ceiling light base: Fix the ceiling light base on the ceiling and use a screwdriver to fix the base at the hole.

4. Connect the wires: connect the wires of the ceiling light with the power cord, use wire cutters to connect the wires and fix the wires on the ceiling light base.

5. Install the ceiling light cover: install the ceiling light cover on the base and fix the screws.

Disassembly:

1. Turn off the power: Before disassembling the ceiling light, you need to turn off the power to ensure safety.

2. Dismantle the ceiling light cover: use a screwdriver to dismantle the screws on the ceiling light cover and remove the cover.

3. Remove the ceiling light base: use a screwdriver to remove the screws on the ceiling light base and take off the base.

4. Disconnect the wires: use wire cutters to disconnect the wires of the ceiling light from the power cord.

It is important to note that you need to pay attention to safety when installing and removing the ceiling light to avoid electric shock and other accidents. If you are not sure of your ability to operate, it is recommended to find a professional to install and dismantle.