2016 Gypsum board ceiling price compilation (including construction technology and effect diagram)

Gypsum board ceiling is one of the most common decorative techniques in home decoration, its expression is flexible, modeling is versatile, loved by the majority of homeowners and friends. Therefore, the editor of Tubaboo here to organize the gypsum board ceiling effect, gypsum board price and gypsum board construction process and other three aspects of the content, to explain the application of gypsum board ceiling in the decoration of the notes. In particular, this article will take the price of gypsum board ceiling as an important content for the Tupa rabbit users to talk about!

>> Please click

tubaru to find the company

free phone consultation on the latest gypsum board ceiling prices and construction technology!

Questions related to gypsum board ceiling price

1:Ms. Li, the owner of Henan Province, asked: How to make a budget for home decoration gypsum board ceiling?

Tubapu rabbit expert answer: in the home furnishing gypsum board ceiling budget is generally based on the unfolding area of how much money a square foot, if modeling the roof, then review the cost of the item by item.

2: Beijing Mr. Wang asked: wood keel gypsum board ceiling price labor cost is how much a flat?

Tubapu expert answer: wood keel gypsum board ceiling price labor cost is generally in the 70 ~ 100 yuan, but the specific depends on the drawings and modeling is complex.

3: Shanghai Mr. Zheng asked: light steel keel gypsum board ceiling labor cost algorithm?

Tubapu expert answer:

Light steel keel gypsum board to do the budget, the price of labor costs

Gypsum board flat ceiling, 40 yuan

Gypsum board layer straight line ceiling two levels, 45 yuan

Gypsum board layer straight line ceiling three levels, 50 yuan

Gypsum board layer Straight line ceiling four or more, 60 ~ yuan

Gypsum board tier curve ceiling two, 50 yuan

Gypsum board tier curve ceiling three, 65 yuan

Gypsum board tier curve ceiling four or more, 80 ~ yuan

Gypsum board screeds pulling seams, 45 yuan

Prices for more than 5 square feet, 5 square feet or less will be a little more expensive.

Materials prices:

Generally 0.2 thick light steel keel 35 yuan a Dragon plasterboard, do the price per square meter of the flat roof

in 40-45 yuan, if you do the arc of the ceiling need to add losses ranging from 15 yuan -25 yuan.

Labor cost with 5% profit, materials with 15% profit.

Attached: gypsum board light steel keel ceiling material algorithm formula

One square meter of two gypsum board general specifications 1.22 * 2.44, 1.22 * 3, by the steel keel length of 3 meters, 4 meters, the ceiling spacing of 600 * 600.

The main keel spacing of 100cm, the secondary keel spacing of 30cm, the gypsum board can be in the computer amount of the top surface area.

4: fujian miss li asked: 2015 fujian gypsum board ceiling package price

tubabuni answer: paper gypsum board 12 ci after a piece of general is 15 - 22 yuan, brand price difference, a piece of specification is 2.4 * 1.2. wood line tens of dollars a with not much

Wooden board after 12 centimeters, a piece of general 18 - 25 yuan, the good and bad of the paint on the price has an impact.

Carpentry now a day generally want 200 yuan, painters are almost 200 yuan.

Materials 30-40?+? Labor 30-40?+? Profit? Various places are not the same, there are good and bad materials, and carpentry work ceiling profits need to be a little bigger to pull the average, generally across the country hanging plasterboard flat roof, then in the 120-160 range.

Related reading:Latest gypsum board top ten brands

Gypsum board ceiling decoration effect picture

Study gypsum board ceiling decorating effect

Living room gypsum board ceiling decorating effect

>; Click to see the picture. >Click to view related cases

>>Click to view related cases

Gypsum board ceiling construction

Introduction of gypsum board ceiling

Light steel keel, which is the profile made of iron, it includes: expansion bolts, hanging bars, big hanging (big hanging), main keel, vice keel, middle hanging (middle hanging), edge keel, and various sizes of joints. Self-tapping screws (drywall nails) are also required when installing gypsum board.

Wooden keel to do the ceiling, its material with basically the same size of the wooden square made of.

Home decoration in the gypsum board ceiling construction

In the home decoration in the gypsum board ceiling construction, each city has a unified decorative construction standards issued by the Decoration Association. You can go directly to the association to inquire about this issue.

Simply put, the main keel spacing of gypsum board is generally between 600~800, and the secondary keel spacing is 600 or less according to the modeling settings. Reinforcement for the diameter of 8 mm spiral reinforcement.

Light steel keel gypsum board ceiling construction

I.? Construction conditions

1, first of all, according to the previous design and construction drawings in the provisions of the construction site to put out a main control line.

2, the ceiling has been according to the keel position pop-up line

Two? Construction process

Construction sequence: play hanging point position line? Play ceiling height line? Drill holes to install the boom? Install the main keel, install the T-type main keel and small bone? Installation and acceptance of mechanical and electrical equipment? Installation of gypsum board

1, according to the room 50 level line, with a ruler vertical to the ceiling design elevation, office 2.6m (50 line back to 2.1m, the level of permissible deviation ± 3 mm), corridor 2.3m (50 line back to 1.8m) along the wall around the bullet ceiling elevation level line, and draw a good keel staging line on the wall, the boom from the wall of 150mm, the main keel distance between the two ends of the wall distance of not more than 150mm, and the spacing of each keel is 1m, and 1m×1m grid line is played well under the floor. Open large office ceiling arch 20mm, small office arch 5mm. corridors, arch 2mm, the short span of the room to the arch.

2, play a good ceiling elevation line and keel staging line position, determine the elevation of the lower end of the boom, according to the location of the large keel and the spacing of the boom, the boom without screws buckle end and 40 × 40 × 4 angle code welding, boom with Φ8 expansion bolts and the ceiling fixed.

3, the end of the boom thread exposed length should not be less than 3mm, when installing the large keel, the large keel should be connected to the boom with hanging parts, tighten the screws firmly. The large keel can be connected with the connector. The large keel should be leveled after installation.

4, 38 and 50 main keel should be arranged parallel to the direction of the lamps and lanterns, the boom should avoid the wind, lamps and lanterns position. Open office ceiling need 12 meters in the upper part of the large keel welding horizontal large keel one, in order to strengthen the large keel lateral stability and boom integrity.

5, in the keel installation is completed, after checking the elevation, spacing, straightness and hanging load in accordance with the design requirements, the installation of the top plate from the ceiling in the middle row of the middle keel at the end of the beginning, the first installed a side card file a small keel, and then the calcium silicon plate resting on the three sides of the keel flange, and then install the other side of the small keel, installed in accordance with the above procedures, and then the final pull line to adjust the T-type Ming keel. Waiting for water, electricity, air conditioning and other specialized processes are completed before installing the ceiling.

6, gypsum calcium silicon board in case of lamps, wind and wall edges need to be cut should be perpendicular to the back of the board ribs cut neatly. Lamps, wind should be adjusted so that the board around the same level. Non-whole board can be cut with a planer groove to make the cut side down to keep it level, corridor gypsum board installation must be done after the nail holes to prevent rust treatment (brush rust paint).

What is the construction method of wood keel plasterboard ceiling?

1, wood keel gypsum board ceiling in the construction of each square meter with wood keel about 1.1 meters, because plywood or paper-faced gypsum board are 1.22 meters * 2.44 meters in size, the general is the wood keel into a 300 * 300 grid. Of course you can set according to the actual situation.

2, between the two ends of the line (cement rope or fish wire line), the line will be pulled tight, you can know whether the leveling. Plastic water pipe is used to set the level of the water line, set the level of the water line can determine whether the two ends of the ceiling is the same height.

3, when fixing the pull line must be the first shelf is good, rise up, in to do fixed!

4, wooden wedges.

5, the last is to play flat water, 6% expansion screws will be 5 * 3 wood keel fixed to the bottom of the original ceiling (spacing of about 1.2 meters), 2 * 3 wood square on the connection 3 * 5 wood square (down the length of the ceiling slightly lower than the length of the ceiling), hit the wood keel shelves, the shelves will be connected to the ceiling draped over 2 * 3 wood square, adjust the level, will be draped over the wood in the protruding keel shelves of the part of the cutting, sealing the gypsum board. The former practice is to use the whole cedar house two ends of the beam or wall to make a false beam, now most of the 6% expansion screws will be used to fasten the 5*3 wooden square to the cement ceiling to make a small false beam, used to fix the small wooden square that hangs down.

How to construct curved gypsum board ceiling?

First, use the woodworking board in accordance with the arc to make the shape (as a keel), and then the gypsum board fixed in the woodworking board on the line. To do this kind of molding, light steel keel can not be used.

Other questions related to gypsum board ceiling

1: What should I do if the gypsum board ceiling collapses in a large area? What is the cause?

The main keel did not fall down, the secondary keel down, that is between the main keel and the secondary keel of the connectors out of the problem, and self-tapping screws have nothing to do. When the initial construction, the use of connectors may be small, construction personnel to install the connectors, the installation of the wrong way, as well as the installation is not in place due to.

2: gypsum board ceiling, scraping putty paint appeared after a water ripples because of what (ceiling and latex paint are two units of construction)?

Gypsum board ceiling, scraping putty paint appeared after a water ripples is because of the following three reasons:

1. The bottom of the wall is the most critical leveling, water ripples is estimated to be the wall is not low enough neat.

2. You have to consider whether the quality of your latex paint is qualified, is not counterfeit latex paint or product shelf life is too long lead to paint within the gum failure.

3. Finally you have to consider whether it is the latex paint is uneven after adding water to use!

3: living room ceiling with cement board or gypsum board?

We are in the south, spring time is particularly humid, I heard that gypsum board is not moisture-proof, so the seller are recommended to use cement board. Now he quoted a square 133 yuan (including installation costs), and that cement board is only 4MM thick. Is this price reasonable?

Gypsum board can be used, but gypsum board is not moisture-proof, if your indoor if it is too much moisture, then you have to choose waterproof gypsum board (paper surface is light blue), with oil-based putty batch, you can play a good moisture-proof effect. But if it is ordinary gypsum board, batch waterproof putty, can also solve the moisture problem. But remember, waterproof gypsum board can not be used in the shower, other bathrooms can be used

Cement board is generally used for the bathroom partition wall material, used in the living room, is not very good, when the surface layer is not good construction, is not a problem of 130, it may be 230,, and the cement board 130 square feet too high a price.

4: how to completely eliminate the cracking of plasterboard ceiling home decoration? Is it better to use indeed cloth than kraft paper?

There are many factors that contribute to the cracking of the ceiling. With indeed, kraft paper and so on, can only deal with part of the case of cracking, but not in any case can be used, to be specific situation specific treatment.

If you use indeed cloth to prevent cracking or good choice. Generally the most easy to crack the place is the corner of the ceiling, in the cutting of gypsum board as far as possible before the L-shaped, the interface away from the corner. Reasonable process, in the specific construction, in the joints open V-shaped line. Inside filler putty, covered with indeed, then scrape putty, latex paint, three bottom and two sides. Normal circumstances is not a big problem, in the humidity, temperature changes in the environment of the region. May have to carry out diatomaceous earth composition processing.

Click here to apply for free decoration insurance, to avoid decoration traps>>>

Recommended reading

The latest top ten brands of gypsum board paper gypsum board ceiling construction process home decoration of gypsum board classification Identify the quality of gypsum board the four major skills gypsum board ceiling quality standards and construction precautions

Recommended reading:

? Eco-wood ceiling manufacturers and brands? How much ecological wood ceiling

• Previous article:Is Chinese food delicious because it uses a lot of spices?
• Next article:Does anyone know the operas of Quyi around the world? For example, Shaanxi's Shaanxi opera; Huangmei Opera in Anhui; Wait a minute.