How to Refurbish Wooden Furniture? Seven furniture renovation steps

With the loss of time people will slowly get old, furniture is the same, especially like wooden furniture used for a long time, its surface will slowly aging, not as new as the beginning of the purchase, full of traces of age. A wooden furniture may be used for decades, some people with it after years of companionship, it also has feelings, in the wooden furniture function is not completely lost, but also able to use the normal time many people will be on it to refurbish. So, how to refurbish wooden furniture?

Wooden furniture refurbishment specific steps and methods

1, unpacking

Observe the structure, carefully unpacked, to maintain the integrity of the whole piece of furniture. First of all, you need to carefully observe the structure of the furniture components and make a good serial number to facilitate later installation, in accordance with the original furniture assembly in the reverse order of the furniture disassembled. Maintain the integrity of the furniture and try to avoid damaging the paint and forming new damage,? Avoid the use of planing knives as much as possible. Part of the old folk furniture production using special structures and techniques, commonly known as "Jedi work", resulting in irreversible disassembly, this time try not to disassemble, but to maintain the original state.

2, cleaning

Remove the floating dust and dirt available high-power hair dryer blowing, can not use a wet cloth to wipe, in order to see the face of the components themselves before blindly using a wet cloth to wipe will cause unforeseen damage. Sometimes parts will also have cement paste, asphalt, chemical paint and other modern garbage such as adhesive, try not to use chemicals to remove, should use physical means to remove, such as fine knife scraping and sanding.

3, paint (except for the old workpiece)

Generally use fine sandpaper to gently sand, the harder parts of the knife scraping. Lacquer can not destroy the original carving part, such as tables and cases of old furniture legs common "incense" line feet, after a long time of natural weathering, very fragile, once ground off, unless the line feet restructuring of different, or become permanently damaged, and then how to repair can not come back to God.

4, ingredients

According to the processing requirements and each of the old furniture parts of the capacity to refurbish the ingredients, the requirements of no cracks, no scar joints, no rot.

5, sanding

Old furniture lacquer can be directly sanded with an angle grinder, thick tung oil lacquer need to be baked with a blowtorch lacquer after sanding; thin lacquer can be directly transferred to the scraping and grinding workshop, with a scraper to deal with the sanding requirements are the various parts of the whitening in place, leaving no dead ends, leaving no surface lacquer, oil stains, the depth of the same.

Natural wood texture and grain, is the most durable simple beauty. Sanding to remove the burrs on the surface of the wood is to show the natural "pulp" effect. Pulp refers to the quality of the wood after a long period of use, the surface of the formation of a layer of warm as jade bright, the more you use the brighter, the traces of this age, known as the pulp.

The best in the old furniture surface hot wax, such as cypress and beech, after polishing hot wax, not long after the "pulp", finish is not worse than hardwood furniture.

6, assembly

Assembly requirements with special glue powder, according to the original structure of the assembly, mortise and tenon structure is tight, the frame of the diagonal symmetry. The whole piece of old furniture without powder glue, four feet to manipulate flat.

7, do lacquer or painting

Doing lacquer is not simply paint, but as far as possible to retain the original lacquer, most of the water wood color of the old folk furniture can be wiped wax. This is a unique feature of the restoration process of antique folk furniture. There is also a need to cover the paint from the new, in general, after the first paint, and then four to five top coat, on the color twice, wipe paint and repainting a **** need eight to ten, the wood is good on the paint and repainting the road? Number can be appropriately reduced. Lacquer film also needs to be sanded, the best effect is the use of human hair repeatedly rubbed. The general requirements of the paint surface sanding is not to leave dead ends, not to leave oil, color uniformity.

It is inevitable that lacquer, but also limited, such as gold cabinets, such as flower decorations wear thin, crusting the lacquer, some customers require to maintain the original state, some customers will ask to make up, those small areas of repair, will not lose the original charm, it is possible. Some of the old furniture is still using phi linen with gray process to do the lacquer, nowadays this process few people will do, you have to ask the master to restore, if the chemical paint a brush, a face of thieves light, the value of this old furniture will be greatly reduced.

How to refurbish wooden furniture? Old wooden furniture to be renovated in accordance with the steps described in the article is able to step by step to complete a good, but should also want to remind everyone that these renovation work does not seem difficult, in fact, the test of experience and ability, professionalism and so on, if you've never done it before, then the renovation is certainly difficult, it is recommended that you can practice more or entrusted to the professional renovation of people to complete a good to avoid the renovation of the wrong because of their own! The first thing you need to do is to make sure that you have a good wooden furniture.

Tubapu online free of charge for everyone to provide "each home decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~