Electric pressure cooker lid float leak?

May be the pot lid and the float in the rise by the connecting rod of the thrust, resulting in can not fall, thus leaking. Or there is a problem with the tightness of the sealing ring after the float rises, in addition, if there is food sticking to the sealing ring that can't balance the lid well, it will also cause the float to leak.

Electric pressure cooker lid float leakage causes and solutions:

Fixed float rubber ring leakage. This phenomenon is the rubber ring is used for too long, the early field of the rubber ring appears to be poorly sealed, so that the float leakage. The solution is very simple, with a new rubber ring can be.

The position of the bumper is generally in the flat handle, if the position is not correct, when the float floats up, the float can not come up completely, thus causing air leakage. In this case check the position of the bumper and re-install it. If it can not be corrected, you can go and ask a professional aftermarket staff to deal with it to achieve the purpose of solving the air leakage.

Old age. It is the electric pressure cooker is used for too long, resulting in the aging status of the float rubber ring. In fact, the leakage is inadvertently appeared, just the beginning of the leakage is not obvious, did not find, with the increase in the number of times of use, the severity of the leakage increased. This situation can be replaced with a new electric pressure cooker.

Leakage is a very dangerous situation, especially when the pressure cooker pressure is relatively high, if you can not correctly solve the problem of leakage, but also cause an explosion, for this reason should be timely to find a professional to assess the problem.