What is the decoration and construction technology of the old and new shopping malls?

The process and technology of storefront decoration in new and old shopping malls are slightly different. There is no difference in the general structural order. Decoration construction technology, decoration technology and construction process are more related to the specifications of decoration builders. Next, we will analyze the decoration technology and construction process of the mold in detail.

Before you update the details of the project docking inspection, decoration, design and construction design of the three-way parking space, leave them to the designer and the construction drawing. Before starting work, the construction party must note the detailed drawings. It is difficult to avoid unnecessary losses before and after construction.

Secondly, it is possible that the materials usually use light steel keel and gypsum board to cover the shopping mall enclosure project, information technology, and the first test after the building enclosure requests the shopping mall, and the surface is covered with inkjet advertisements. Some shopping malls need to be very high, and the exterior of the shell needs to be completed with solid wood lines, which is beautiful as a whole.

Envelope standard chart

Third, the shell is a formal construction stage, which will require horizontal points. If necessary, start demolition projects and strive for demolition projects. Demolition project should be careful, don't support the wall load, in order to distinguish the finished load-bearing wall and column. After the demolition work is completed, the cement should be cleaned and removed in time to prevent the site from being closed.

Fourth, in the advanced field of gypsum, there must be local building masons in the decoration construction process project. First, we must move sand or mud to build a wall, and then try to finish the flat concrete floor. In simple external buildings, workers are advised to build a flat or cement floor, and the dust in the first sanding process will be brought out and damaged before packaging. Of course, before you lay bricks or land, you must first do a hydropower project.

Five, water and electricity requirements hidden, decoration construction process involves electrical engineering should be hidden on the ceiling. On the front of the wooden sealing board, the power supply requirements in the decoration construction process must be stricter than the requirements of the mall for installation, construction and electrical engineering materials, so don't cut corners, because the decoration construction party is a very strict shopping mall, and the loss of the latter is very serious.

Walking on the ground.

Woodworking decoration, good ceiling panels, patchwork, the decoration construction technology sets the difference between the thickness of various gypsum ceiling partitions and side handles and the manhole with good ceiling. There is a manhole, and the imported plywood side ATDA is closed to prevent the edge from being trampled in the future.

Seventh, the painter's method, cracking, decoration construction technology, decoration construction technology rust prevention and putty batch bottom ash before, to prevent seam cracking, the flat-fell seam between the screw and the starter needs to be put in an oil pan.