What is the best maintenance method for fishing rods, fishing lines, hooks, floats and fishing boats?

1. fishing rod 1: Only by standardizing the use of line groups can the fishing rod be prevented from breaking!

Many fishermen seldom have the habit of watching the fishing rod line when fishing, and always feel that hanging it is enough, so there are cases of broken rods. These people usually don't know why. Good quality or big brand fishing rods all have the actual introduction of the matching of the auxiliary line. After buying a beloved fishing rod, you must match the auxiliary line according to the instructions, so that the strength of the auxiliary line is consistent with the tension of the fishing rod. Otherwise, it will be too late to save when the line is broken and the rod is broken. Normally, the fishing rod will indicate how thick the line set is, and everyone must follow the specifications when using it, otherwise it will break. In case of emergency, if the hook is hooked, breaking first means dividing the line, which can also ensure the continuation of the pole. Then the only correct way for us is not to use the parting line beyond the required strength casually to ensure the safety of the fishing rod.

2. How to maintain the swollen fishing rod?

After coating, the fishing rod will swell due to contact with water quality. At this time, if you pull it too tightly, it will easily cause joint looseness. The best way is to take it home and open the back cover to dry the fishing rod before releasing it, which will easily damage the fishing rod. You have to clean the water in the fishing rod with a dry towel, pull out the fishing rod one by one, take out all the rod joints, scrub them carefully one by one and dry them. If possible, you can use maintenance oil, which is tie rod oil. Rod oil can keep the waterproof paint on the appearance of the rod well. If the waterproof paint is well maintained, the fishing rod will not enter the water, and the oiled fishing rod will not be easily stained with more stains. Please pay special attention to the area where the connector is connected. If the water is put away before it is dry, it will lead to paint stripping or foaming on the fishing rod surface. Then, the dried fishing rod should be placed in a ventilated, cool and dry place for a period of time before being put away.

3. Different seasons, different preservation methods.

Cold winter and hot weather can't resist the passion of fishing friends, but do you keep the same way in different seasons? In winter, fishing rods must be carefully maintained. For example, if carbon rods are not used for a long time, it is best to dry and shrink them and put them in the original packaging box. You can't put boxes at will. If conditions permit, it is best to put the box in a room with relatively stable temperature and low humidity. If you can't find the original box, you can put it in a special cover and stand upright in a room with stable temperature and low humidity. Don't throw it sideways on the ground.

(2) When the temperature rises in spring, the air humidity begins to increase, and the temperature difference between day and night, indoor and outdoor is relatively small. Everyone should take out the old fishing rod, clean it carefully, put some wax on it, and finally restore it to its original state. If there is no space to store fishing gear, you can make a fishing gear storage cabinet. The locker should not be exposed to direct sunlight, and the indoor temperature should not exceed 30℃ as far as possible. Can't put it in high-temperature kitchen utensils or kitchens.

Second, the fishhook is the maintenance method of the fishhook. Because of its small size and light weight, many people usually ignore its importance and think that it can be put anywhere after use, which will not only lead to oxidation and corrosion of the hook when it comes into contact with wet and cold weather, but also lead to scratches on the hand, which will hurt children if it is thrown around. After each fishing, put the used hook in a ventilated place to dry. It's best to wrap it in paper to avoid getting wet.

Third, the fishing line I believe that the most likely situation when you use it is the knotting of the fishing line. After each application, put it in a corner with sundries, so it is difficult to tie the fishing line without tying it. When maintaining the fishing line, if the fishing line is found knotted or coiled, it should be replaced as soon as possible. Otherwise, when encountering a big fish, the tension of the fishing line may not be able to bear the original tension. The unfinished fishing line is directly wrapped on a clean board, and then put into a plastic bag for sealed preservation. The used fishing line should be cleaned with a soft wet cloth when winding to remove impurities attached during fishing and prevent the line from being damaged. When the fishing line is taken up, it should not be wound too tightly, which will affect the structure and tension of the line for a long time. When not used for a long time, it should be stored in a dry and cool place to prevent high heat and sunlight.

Four, the basic maintenance of the fish wheel mainly includes the cleaning of the silk cup, rocker and its main components and the lubrication and oil supply of the matching surface. Most change gears are all metal, so it is inevitable that people will get along with water when fishing. After a long time, the gear won't bite tightly and will rust. Sometimes it is necessary to take the cup holder out of the maintenance of the fish wheel, open the gear box cover on the main frame to let the water vapor evaporate naturally, and then reload the oil.

Five, floating in the sun for a long time, waterproof paint will fade and crack for a long time. Bian Xiao tells you a small method, which can effectively prevent the bleaching waterproof paint from fading by applying moisturizer or moisturizing cream to the surface of the float and then using wax to solve it. Wash the floats and sort them. Be sure to put it in the bleach box. Bleaching boxes are generally more durable and much better than bleaching barrels. Bleaching that has not been used for a long time should be taken out occasionally for soaking and maintenance to avoid natural cracking.