How to polish jadeite

The jadeite polishing method is as follows:

Method of polishing process 1:

1. Soak and smear: Soak jadeite in warm water for any time. Take it out and apply a proper amount of toothpaste, about the size of a edamame.

2. Brush your teeth repeatedly: apply the toothpaste evenly with a toothbrush, and do a full-body SPA for it, and polish it repeatedly for about 10 minutes.

3. Cleaning and oiling: put it in warm water to remove toothpaste foam, apply a little essential oil (peanut oil) and wipe it back and forth with glasses cloth until the essential oil is evenly covered.

4, cleaning and standing: put it in warm water again to remove the surface, don't worry, dry it and put it in the shade for a few hours.

Method 2 of polishing process:

1. Preliminary grinding: grinding sandpaper and gently grinding the epidermis. In the meantime, it is recommended to be gentle and not rough hands and feet, so as not to leave obvious scratches.

2. Oiling: Apply a proper amount of polishing oil to the felt grinding head and evenly coat it on the jade.

3. Brush the felt: brush it carefully back and forth with a felt grinding head until the brightness is satisfactory.

4. Secondary grinding: finally, slightly grind with polishing sandpaper.

Method 3 of polishing process:

1, polishing powder: apply a proper amount of polishing powder to jade.

2. Preliminary polishing: Brush back and forth with a hard brush for about 5 minutes.

3. Secondary polishing: coat another layer of polishing powder and polish it repeatedly with soft cowhide for about 10 minute.

4. Cleaning: Clean and wipe the polishing powder with alcohol.

5. Pull-up polishing: Apply a proper amount of polishing wax to jadeite, dry it in the shade, and let the bracelet stand for several hours.