The timer of the dehydration barrel of the washing machine is broken. If you twist it, it will bounce back immediately. How to fix it?

The timer of the washing machine is broken. Twist it and it will spring back immediately. In this case, the mechanical structure inside the timer is damaged.

1. If the spring falls off or breaks, it can be reloaded or replaced.

2. Due to gear damage, poor gear engagement or loose cam assembly damage, the machine stops. If the parts are damaged, they should be replaced.

3, be affected with damp or water, such as timer cover cracks or water droplets, should first dry the dew and water droplets, and repair the cracked cover or replace parts.

Wiring diagram of washing machine timer:

The timer of washing machine generally has 6 wires, including 7 wires, 8 wires and 9 wires (with buzzer), so the wiring sequence is very important during maintenance and replacement. Because in many wiring, as long as a wrong wire is connected, the timer will not work.

Extended data:

Matters needing attention in the use of washing machine spin-drying timer:

1, rotate the timer with even force. Don't use too much force to avoid damaging the internal mechanism.

2. When the timer is at zero stroke or full stroke, do not twist it back and forth to avoid damaging the plastic positioning gear.

3. Although the timer has the function of forced reversal, it should try to avoid unnecessary reversal in use to avoid damaging parts or reducing service life.

4. Don't push and pull the timing knob hard, so as to avoid loosening the internal fasteners or misplacing the parts, which will damage the timing performance.

5. When the timer is damp, dry the dehydrator in time. Although the timer has leak-proof measures, it is not a sealed structure. Therefore, after it seeps into water, it is easy to cause internal rust and reduce the electrical insulation performance.