Bamboo doorway making tutorial

Bamboo doorway making tutorials are as follows:

A, materials:

1, bamboo is preferred to use the texture of the fine, long section, no insect infestation of the green skin of nanzhu.

2, tools and equipment; miter saw,, planer, hand drill, vise, drill, angle grinder, grinding wheel, jigsaw, anti-flying chip mask, knife, measuring tape, brown brush.

Second, the process ：

Preparation before processing → material selection → dissecting material → scraping the surface → trimming and chamfering → drilling → assembling into a frame.

Three, the operation of the essentials:

1, select the material, according to the design requirements to select the appropriate specifications of the size.

2, the selected material for truncation, according to the requirements of the design drawings of the various parts of the treatment, and check for cracking phenomenon, such as cracks need to be dealt with in a timely manner before use.

3, with a planing knife or hand saw to the need to process the part of the picking off the outer skin after roughing, so that the surface flatness to meet the requirements.

4, with the angle grinder in the surface has been cut to grind out the general shape of the fine grinding until smooth and delicate.

5, in accordance with the pre-designed size and location of the components assembled to form a complete doorway frame structure.

6, the last brush on the oil can be completed!

Note:

1, if you like, you can paint your favorite pattern on it Oh ~ but be careful not to paint outside Oh ~ otherwise it will be very difficult to clean up.

2, because it is made of small bamboo so it is relatively heavy! So be careful handling and placement oh.

3, it should be noted that because it is handmade, so in the transportation process must be careful to put ah ~ to avoid damage.