How to connect the speakers to the computer

How to connect the cable of the speaker correctly in the computer?

Connect the cable of the speaker to the computer correctly, as follows:

1. First prepare the speaker and computer host, as shown in the figure below.

2. Next, turn the side of the computer with many jacks, as shown in the figure below.

3. Then insert the two plugs of the speaker into the main machine, and insert the round head line into the green or red hole, as shown in the figure below.

4. Next, plug the speaker flat cable into any USB interface on the computer host, as shown in the figure below.

5. Finally, after all cables are plugged in, the speaker is connected to the computer, and the speaker is connected to the computer, as shown in the figure below.

The one with black head and red and white head is the audio cable, the big speaker is the main speaker, also called the subwoofer, and the two small speakers are the speakers of the left and right channels. Detailed connection steps are as follows:

First, insert the plug of the small red speaker into the red audio output hole of the right channel of the main speaker (normally red, right, white and left).

2. Insert the plug of the small white speaker into the white audio output hole of the left channel of the main speaker (generally red, right, white and left).

Third, then insert the red audio input plug of the connecting cable into the red audio input hole.

4. Then insert the white audio input plug of the connecting cable into the white audio input hole.

5. Finally, insert the black plug at the other end of the connecting cable into the green jack on the back of the chassis to complete the connection.

How to connect the speaker to the computer?

The speaker is connected to the computer host, and the specific process is as follows:

1, first observe the jack of the computer audio. The jack of the computer audio is mainly a power jack and two audio jacks.

2. As shown in the figure, plug the cable of the computer audio jack tightly.

3. Observe the audio jack on the host. In fact, the audio jack on the host is colored, as shown in the figure.

4. Then plug the cable of the computer stereo into the socket of the host computer, and finally plug in the corresponding color, as shown in the figure.

5. As shown in the figure, plug the power plug of the computer stereo into the power supply.

6. After the computer audio jack is plugged in, you can try it. If there is a sound, it means it is plugged in correctly. If there is no sound, you should plug it in again until there is sound.