How to open the traditional tire line casting net

The specific steps of opening are as follows:

1. Turn the tire over and put the heavy object in the center of the tire to ensure the stability of the tire.

2. Cut the inside of the tire with scissors or a knife. The cut position should be at the top of the coil, that is, where the inner and outer coils are wound.

3. Find a fixed point on the inner winding, cut this point, take this point as the starting point, and gradually cut the line along the incision.

4. Pull out the threads in turn until the threads in the whole tire are taken out, then fix the threads on the grid and tighten them to make them smooth.

5. On the outside of the tire, that is, just at the incision, find a fixed point, cut this point, take this point as the starting point, and gradually cut the line along the incision.

6. Remove the thread from the top of the net so that the net can stretch freely.