The correct way to adjust the drift of wild fishing fishing

The correct way to adjust the drift for wild fishing is as follows:

1. Heavy lead to find the bottom: add a piece of large lead to the lead holder and throw it into the water, the float will be completely submerged in the water under the effect of the gravity of the lead drop, and then lift the rod and pull up the float until the float is level, at this time the distance from the lead drop to the top of the float (not the float holder) is the approximate depth of the water.

2, half-water adjustment: float pull down greater than the distance between the float and the length of the subline, and then trim the lead until the float reveals the number of eyes you want to adjust, for example, adjusting the 4 eyes will be cut to the float exposed to the surface of the water 4 eyes can be, at this time, the gravity of the lead drop is roughly equal to the buoyancy of the float.

3, hanging bait to measure the weight: hooks hanging bait thrown into the water, the float sinks down the number of mesh is the weight of the bait, such as empty hooks is adjusted to 4 mesh, hanging bait after the float reveals 2 mesh, indicating that the weight of the bait is 2 mesh, in order to ensure that the sensitivity of the bait size to be uniform.

4, adjust the fishing eyes: hang the bait on the float to pull the float to show the number of eyes want to fish, for example, empty hook 4 eyes, the weight of the bait is 2 eyes, the float to show more than 2 eyes belong to the fishing blunt, the float is just 2 eyes belongs to the spirit of the blunt, the float to show 2 eyes belongs to the spirit of the fishing.

The notes of wild fishing drift are as follows:

1, choose the right drift: according to the fishing conditions and target species to choose the right drift. The buoyancy of the drift should be suitable for the weight of the fishing and the habits of the fish species to ensure that it can accurately perceive the signals of fish biting.

2. Adjust the depth of the drift: Adjust the depth of the drift according to the target species of fish being fished and the condition of the water. Generally speaking, the position of the drift should be below the bottom of the water, but not too deep so as not to miss the chance of fish biting.

3. Pay attention to the drift: When fishing, the drift may be affected by the current and drift. Always pay attention to the position of the drift and adjust the depth and position of the drift in time to keep the bait in the right area.

4. Pay attention to the sensitivity of the drift: Different drifts have different sensitivities, and you should adjust the sensitivity of the drift according to the target species of fish you are fishing for and the condition of the water. Too much sensitivity may lead to misjudgment, too little sensitivity may miss the signal of fish biting.

5. Pay attention to the stability of the drift: The stability of the drift is very important to the perception of fish bite signals. Make sure that the drift is smooth and vertical in the water, and avoid any wobbling or tilting of the drift that may affect the signal transmission.