What is the meaning of energy saving mode of air conditioner

Nowadays, air conditioners are very intelligent, all with energy-saving mode, so that when you use it, you can save more electricity. So what is the meaning of the energy-saving mode of the air conditioner?

A, air conditioning energy-saving mode is the meaning of

Air conditioning energy-saving mode can control the indoor temperature, more energy-saving, is through the computer automatically set the code, the air conditioning will be turned on, will automatically set the temperature, when the indoor temperature is higher than 25 degrees, the wind speed will be automatically adjusted to the high speed operation, and so on when the temperature to the set temperature, and then low-speed operation, very good, very good, very good.

Two, air conditioning power saving tips

1, you can adjust the air conditioning to energy-saving mode, which will be more energy-saving power.

2, the use of air conditioning, do not frequent switching, so that the compressor is easy to wear and tear, and power consumption. Turn on the air conditioning 5-10 minutes before the temperature setting can be adjusted upward to maintain the air supply will be more energy-saving.

3, set the room temperature, do not and outdoor temperature difference is too large, such as outdoor 30 ℃, indoor set 25 ℃ can be, if you feel not cold, the temperature can be adjusted downward by a few degrees, so that the air conditioning high-frequency operation time is short, can save electricity.

4, the installation of air-conditioning as far as possible to choose the back of the room, to avoid sunlight on the air conditioner, and then hang a layer of thicker curtains, which prevents the indoor and outdoor hot and cold air exchanges. In addition, the airtightness must be good, the window should be closed tightly to keep the cold air is not lost.

5, air conditioning filters should be cleaned regularly, otherwise it will affect the cooling effect, increase the power consumption of air conditioning, cause compressor overheating.