Semi-automatic flame cutting machine cutting round instructions for use

1. Knock a good positioning eye on the surface of the steel plate;

2. Put the radius rod of cutting circle on the body of the machine, put the positioning needle into the positioning eye and tighten the positioning screw according to the radius size of the cutting circle, and at the same time raise the positioning needle to make the guiding wheel on the one side of the needle leave the steel plate, and then rotate the front and rear wheels around the center of circle by using the other side of the gas cutter and carry out the cutting;

3. When cutting a small circle, put the locating pin on the same side of the torch, when cutting a large circle, put the locating pin on the opposite side of the torch.

Name: Semi-automatic Flame Cutting Machine

Model: CG1-30B

1.Total weight 28Kg

2.Cutting thickness 5-100mm

3.Cutting circumference diameter ￠200-￠2000mm

4.Cutting speed 50-750mm/min

5.Input voltage AC/DC, AC/DC, AC/DC, AC/DC. p>5. Input voltage AC220V/50Hz

Technical Parameters

Performance Description:

1. The body is made of high-strength alloy aluminum precision die-casting