How to tie a bow belt?

How to tie a bow belt:

1. First, fold the belt into equal lengths and put it in front of the waist. 2. As shown in Figure 2, fold the left waistband inward with the corner of the waistband located below. 3. Fold the right waistband reversely, bypassing the folded left waistband and reaching below the folded waistband, as shown in Figure 3; 4. Fold the wrapped right waistband outward and fix it by hand; 5. Put the folded right belt through the vertical knot formed by bypassing the left belt just now and arrange it into a suitable shape.

Illustration of how to tie a windbreaker belt bow

1. Go through two belts first.

2. Fold down the belt.

3. Put it on the left.

Step 4 pick up the tape on it

5. Put it on the tape below.

6. Pass the upper belt through the lower belt.

Illustration of how to tie a bow belt

How to play with illustrations with bows;

1. First, put the two belts of AB in a cross position, and pay attention to the position. B is above a.

2. then circle a with B.

3. Then make B into an S shape, and pay attention to the appearance of S ..

4. put a under B.

5. then bend a.

6. Then put the bent part of A in the upper half of B's S-shape.

7, the final adjustment, a lovely bow is completed.

Illustration of how to tie a windbreaker bow belt

Illustration of how to tie a windbreaker bow;

1. First, put the two belts of AB in a cross position, and pay attention to the position. B is above a.

2. then circle a with B.

3. Then make B into an S shape, and pay attention to the appearance of S ..

4. put a under B.

5. then bend a.

6. Then put the bent part of A in the upper half of B's S-shape.

7, the final adjustment, a lovely bow is ready.

How to tie a bow on a belt? Recommend many simple methods.

Steps/methods:

1

First, cross the two ends of the belt, fold one end backward and press it on the other end;

2

Use the other end of the belt to bypass the front of the belt and fold the tail in half to support it;

three

Drill out the clamped part of the belt from the circle that was bypassed before, tighten it hard and flatten the position of the bow;

four

Adjust the length of the bow and an elegant bow will be tied.

Illustration of how to tie a coat bow

How to tie a coat bow;

1. First, put the two belts of AB in a cross position, and pay attention to the position. B is above a.

2. then circle a with B.

3. Then make B into an S shape, and pay attention to the appearance of S ..

4. put a under B.

5. then bend a.

6. Then put the bent part of A in the upper half of B's S-shape.

7, the final adjustment, a lovely bow is ready.

How to tie a bow for broadband children? This is a wide belt.

360 degrees ... shtml has many websites, one of which is broadband. I tried it myself. It's beautiful and easy to learn.

How to tie a bow tie, belt, clothes, belt, bow tie method

Let the rope of the right hand be tied on the rope of the left hand before knotting. This is a bow.

How to tie a bow on the belt of clothes is simple and beautiful.

Step 1: Make the left belt longer than the right belt by about 10cm. If two straps are cross-knotted, the positions of the long and short ends will be reversed, that is, the long end will be to the right and the short end will be to the left. Step 2: Make a ring at the left end and press it, then press the ring just made on the clothes and fold the right end over. When operating this step, everyone needs to press the fixed belt shape hard. If it is loose, all previous efforts will be in vain. Therefore, the second step of the belt bow tie diagram is also the last important step that directly affects the effect. Step 3: At this time, we need to fold the right strap under the ring. Then naturally pull out the folded ring. Finally, a beautiful belt bow is tied. Finally, I want to remind you that the pattern size of the bow of the belt depends on the length of the belt. Fold it onto the windbreaker moderately and tie the tail tightly with a rubber band.