How to drill holes in ceramic bottles

Drilling is a fine craft, but drilling ceramic bottles is a relatively difficult technical work. Ceramic bottles due to its fragility, making the process of drilling holes is very easy to cracks or broken pieces of porcelain. Therefore, before drilling holes in ceramic bottles, you need to make adequate preparations to ensure that the operation goes smoothly.

First of all, before drilling holes in ceramic bottles, you need to choose the appropriate tools. Common tools are electric drills, drills and coolant. The speed and torque of the electric drill should be moderate, too high will cause the ceramic tile to break, too low will not be able to drill. Drill bits should be selected specifically for ceramic materials, harder and sharper. Coolant should be used to reduce the temperature of the ceramic tile, reducing the possibility of ceramic tile rupture.

When drilling holes in ceramic vases, caution is required. First, use a drill bit to mark the location on the ceramic vase where the hole needs to be drilled to avoid being off target. Then, drill the holes in a slow, low-pressure manner, during which coolant is added at the right time to reduce the temperature of the ceramic vase. When the drilling is completed, it is necessary to gently clean the porcelain chips to avoid fragments remaining. Finally, the necessary trimming of the ceramic tile, so that the hole is smooth and neat, both beautiful and safe.

Through the above preparation and operation, can help us drill holes ceramic bottles smoothly. However, it should be noted that drilling ceramic bottles is still a technical work, requiring experience and patience, non-professionals need to be careful operation, so as to avoid damage to the ceramic tile or injury.