Traditional Culture Encyclopedia - Traditional stories - Fishing rod first diameter and meta diameter illustration
Fishing rod first diameter and meta diameter illustration
The first and first diameters of a fishing rod are illustrated in the following diagram:
1. The first diameter
The first diameter of a fishing rod is the diameter of the thinnest part of the rod tip. The diameter of the rod is the thinnest diameter at the tip. Both the diameter of the rod and the diameter of the rod are parameters that need to be taken into account when choosing a rod, especially the diameter of the rod, which affects the ease of use and operation of the rod, and must be taken into account.
2. The diameter of the rod
The diameter of the rod is the diameter of the front part of the handle, which is roughly where the rod stops. The thicker the diameter, the thicker the tip, and the stiffer the rod. But very thick first diameter, such as Luo Fei rods, loss of feel too much, but also easy to cut the sub line. When choosing a fishing rod, you also have to consider the length and hardness of the rod, such as the length of 4.5 meters is often used, tuning 37 soft and hard rod is often used.
Tips for choosing a fishing rod
The choice of fishing rod should be light in weight, for example, for domestic competitive carp fishing tournaments generally use 3.6-meter-long rods for the tournament rods, usually used for recreational fishing rods are generally used for the rod 5.4-meter-long rods. The body of the rod should be straight, and the wall of the rod should be uniform, thick and thin, without hard wounds or cracks. The interface interface wall thickness should be consistent, the interface cross-section should be flat, the sections must be inserted with the socket tight bite, the rod interface is neither too shallow, nor too deep.
After the rod is bent by the force, the good rod's curvature is a gentle transition state, and can be restored to its original state after removing the weight. Poor rods have dead spots in their curves and do not return to their original shape after removing the weight. The hardness of a fishing rod can be tested according to a practical standard weight. When choosing a fishing rod, use a pre-prepared weight or a temporary plastic bag filled with weighted lures, tie it to the tip of the rod, and then slowly raise the rod, when the weights off the ground so that the tip and the bottom of the rod handle to remain on a level line.
- Previous article:Problems and status quo of department store retailers in the marketing process~!
- Next article:Linyi beer market status
- Related articles
- What are the main points of architectural decoration in Guangzhou?
- Scrap Paper Brother Mingle Revolver Tutorial
- Composition for Spring Festival in Grade Four
- Snack street frequented by Chengdu people
- Seeking the historical story of Jilin? Historical culture? Historical celebrities? Monument?
- Gothic architecture, Byzantine architecture, Baroque architecture, Roman architecture. What is the biggest difference?
- The practice of sashimi
- Which of the following movies has a theme related to our traditional martial arts?
- People who get angry can't eat any fruit, but what fruit should they eat?
- How to judge the improvement of students' traditional cultural literacy, and what is the basis and standard of judgment? What is the index system of design evaluation?