Comparison of square wood multi-blade saw and traditional

1. Safety power transmission device and saw blade are completely exposed, many unsafe factors, very easy to work accidents. Power transmission device and saw blade, guide piece, etc. adopts fully closed design, the operation is extremely safe.

2. Output rate roundwood - rough board - light panel consumable rate 25% consumable rate 15% by two processes, the total output rate of 75-80% roundwood - light panel consumable rate 25% only by two processes. Light panel consumption rate of 25% by only one process, the output rate of 80-88%

3. Power consumption processing each roundwood consumes 20-30 degrees processing each roundwood consumes 10-13 degrees

4. Efficiency A, two masters per hour longitudinal section of the roundwood 0.65, each master according to the market of 1,800 yuan / month calculation, each processing cost of about 30 yuan B, the pressure planer planing 22 Gross board wages of about 15 yuan C, the completion of the two processes should be paid wages of 45 yuan A, two masters per hour can longitudinal section of 3 roundwood, each roundwood sawing board wages of about 6.5 yuan B, no need to press planing process, the product directly into the light panel C, the completion of the same left ergonomics, only pay wages of 6.5 yuan.

Work efficiency is 4 to 6 times the traditional process 5 environmental protection A, wood chips floating, dusty, poor environment B, cooling water in the saw table around the diffuse flow C, the noise is not closed, decibel big and ear-piercing A, the wood chips to the base of the chip pool has to be filled with deposition, to solve the dusty problem B, cooling water can be absorbed by the wood chips, not discharged C, by the body closed to reduce noise decibel value 6 operation and maintenance A, the need for a professional master operator. A, need to hire a professional master operator with high salaries, talent is hard to find, high salary costs B, band saws due to loose structure, saw blade fragile, affecting the quality of the machine saws more factors, maintenance is frequent C, operation and maintenance of the labor intensity are greater A, the general workers only need to be trained by the two classes of pre-service can be operated proficiently, the salary cost can be greatly reduced B, the structure of the design of scientific and reasonable, to achieve the intelligent operation of the electronic control, wear-resistant saws, factors affecting the quality of the saws Few factors, the number of maintenance is very small C, operation and maintenance of labor intensity are less 7 roundwood utilization rate of 8 centimeters in diameter, length of 1 meter below the roundwood, difficult to operate, generally not machine sawing into slabs, small roundwood difficult to use the minimum diameter of roundwood up to 5 centimeters, the shortest length of up to 50 centimeters, and the power consumption of roundwood with the size of the caliber of the natural increase or decrease in roundwood utilization, roundwood utilization of high 8 plant utilization rate of each band saw or circular saw Minimum floor space for each band saw or circular saw is about 20 per unit (including the operating position) covers an area of up to about 109 payback period of about 30,000 yuan per band saw (including ancillary facilities), the processing of 1,200 roundwood can be recovered investment of about 40,000 yuan per circular saw, the processing of 900 roundwood can be recovered investment of 10 developmental confined to small-scale wood products, timber processing workshop, the enterprise is difficult to do strong, large production cycle is short, Fast delivery time, production scale, wood processing enterprises will soon be able to do strong, Zhonghao woodworking machinery square wood multi-blade saw.