How to make hexagonal wooden gazebo

The methods of making hexagonal wooden pavilions include preliminary preparation, site lofting, foundation and building foundation construction, pavilion body (roof truss) making, pavilion body decoration and so on.

First, the preliminary preparation

Determine the scheme, the design unit will draw the design drawings, conduct detailed exploration on the construction site, purchase materials as planned, and make good preparations for anti-corrosion and air drying.

Second, the site lofting

With the person in charge of Party A, the location shall be designated according to the construction drawing, and the setting-out size shall be the final size of the exhibition hall, and the size of concrete foundation shall not be confused. Spread boundary markers with 30cm battens, pull up the construction line, evenly spread white lime, and pay attention to distinguish the signs of piles, such as the starting point of steps and piles.

Three. Foundation and building foundation construction

Generally, the construction is carried out according to the purpose of the exhibition hall and the construction requirements of Party A, and it is divided into concrete foundation and wooden pile foundation. Generally, in public places where people flow a lot and use for a long time, the foundation is made of concrete to ensure the service life. In the courtyard of a private villa, the flow of people is small and the use time is short. Considering the construction cost, wooden pile foundation can be used.

Four, pavilion body (roof truss) production

1. Installed balcony

Finished product installation is to transport the prefabricated wooden components to the site for installation, so as to ensure that the parts will not be damaged during transportation and handling. During field installation, the labels and screws corresponding to each component should be matched strictly according to the factory drawings, and the connection with the foundation must be fixed according to the requirements of the drawings. In order to ensure the correctness and stability of the building frame, technicians are required to measure and correct it at any time, and the installation sequence is from inside to outside and from top to bottom.

2, with anticorrosive wood whole material specifications on-site processing and production.

When purchasing materials, we should try our best to avoid excessive waste according to the size of the exhibition hall, and ensure the quality of the purchased anticorrosive wood materials, and must not be distorted, deformed or cracked. Materials should be completely antiseptic and dry.

V. Construction of Pavilion Top (Roof)

The roof frame of the pavilion belongs to big wood, and the components of the finished pavilion can only be installed according to the drawings. If it is a material processed on site, pay attention to the construction sequence of each layer structure and the installation sequence of roof, main beam, cross beam, roof, panel and waterproof material. There are many materials on the top of the pavilion. According to different styles, there are commonly used anti-corrosion wood laminates, asphalt tiles, glazed tiles, thatched tiles and plastic tiles.

Six, pavilion body decoration

After the overall framework of the exhibition hall is completed, different accessories can be installed according to the function and location of the exhibition hall. If the pavilion is mainly for rest, you can sit in two or three long chairs with a beauty chair beside it, which can play a very good role in enjoying the cool and sheltering from the rain. If it is mainly for viewing, you can do some decorations on the pavilion according to the surrounding environment, such as antique carving, or decorative grids, pendants and so on.