Traditional Culture Encyclopedia - Traditional stories - How to use the pulley of fishing rod?

How to use the pulley of fishing rod?

Winding method:

1. Check the winding amount of the reel (generally marked on the reel or packing box) and select the appropriate fishing line model.

2. Install the fishing reel on the fishing rod and turn off the fishing reel inspection switch.

3. Knot one end of the line, pass through a guide ring of the fishing rod, open the outlet ring of the fishing wheel, tie the line on the reel, close the outlet ring, pull the fishing line, and check to make sure it is firmly fastened.

4. Keep the fishing line straight and tight, and start to rotate the rocker of the fishing boat at a constant speed to take up the line.

5. When the winding height is about 1.5-2 mm lower than the spool edge, don't wind more or less, otherwise it will hinder you from throwing the wire correctly. Keep the fishing line straight and tight, stop winding and cut the fishing line.

6. Then fix the fishing boat on the fishing boat seat on the fishing rod and you can get ready to fish. Although the drum fishing reel is not big, its linear capacity is equivalent to that of the rotary fishing reel.

Wheel loading method:

1. Install the fishing reel on the fishing rod (closed state).

2. Turn on the fishing wheel inspection switch, open the fishing wheel outlet ring, pull out the outlet ring, close the outlet ring, and thread the line through the fishing rod guide ring in turn.

3. Tie down the rope, tighten all sections of the fishing rod, and close the fishing boat.

Throwing method:

1. Turn on the non-return switch of the fishing boat, turn the rocker, adjust the line to a proper position, and turn off the non-return switch.

2. Hook the fishing line with your forefinger, tilt your head and send the rod back. If the line falls to the ground, the distance between the rod and the ground is better.

3. Push the fishing rod forward sideways. When the pole is in front of the side and forms a 45-degree angle with the ground, the conductor will be loosened and ejected due to the shaking force.

4. When the line falls into the water, shake the lever, close the water outlet ring, tighten the fishing line, and put the fishing rod on the fishing rod rack after paying out.