How to make a rabbit headdress? You can wear it by hand.

How to make a rabbit headdress by hand can be worn like this:

Preparation materials: disposable lunch box cover or ice cream box cover, colored sponge paper, non-woven fabric, cardboard, twist stick, marker, double-sided tape, cartoon eye mask, scissors and awl.

1. First, cut out two circles with cardboard and color sponge paper respectively.

2. First cut out a pair of big rabbit ears with cardboard, and then cut out a pair of small rabbit ears with sponge paper.

3. Glue two circles together, then glue two pairs of rabbit ears together, and then glue the rabbit ears on the circles to make the rabbit's head.

4. Cut a bow with sponge paper, and then stick the bow and cartoon eye patch on the headdress.

5. Cut a pair of white rabbit teeth, then draw a mouth on the headdress, and then stick the rabbit teeth under the mouth.

6. Drill two holes on both sides of the box cover, and then tie the torsion bar to the box cover.

7. Finally, stick the lid of the lunch box on the finished headdress.

8. done.

Production method:

Cleaning the glass: after the glass is cut according to the specifications, the front and back sides are washed with tap water, then the iron red powder is coated on the side needing water electroplating, dried, wiped off and washed with water. Then scrub the surface of the glass to be plated with a small amount of tin chloride solution. Rinse the residual stannous chloride with water after cleaning. Finally, clean the glass with clear water (preferably distilled water).

Silver plating: put the cleaned glass flat on a horizontal wooden frame or batten, take part of silver solution and part of reducing solution, stir them evenly and pour them in. The potion should not run away. About 2 deciliters per square meter. When it gradually reflects the silver mirror on the glass, pour out the excess liquid medicine, rinse it with water, and then pour in one ten thousand gelatin to dry. After drying, coat a layer of iron red primer or other antirust paint solution on it to form a mirror surface.