What are the washing machine structures? Introduction of basic structure of washing machine

The washing machine has now entered every household and is basically one of the indispensable household appliances. Washing clothes and washing clothes mainly rely on mechanical movement. I wonder if you know what the washing machine structure is? Next, we will introduce you to the basic structure of the washing machine, hoping to help you.

What are the washing machine structures?

Basic structure of washing machine 1. Structure introduction of washing department: The washing department is mainly composed of inner cylinder, outer cylinder, inner cylinder fork frame, rotating shaft and roller bearing. The inner drum, also known as the drum, is the key operating part of clothes washing, rinsing and dehydration, and its structure directly affects the washing effect. Generally, the inner cylinder is made of polished stainless steel plate with a thickness of 0.4 mm ~ 0.7 mm, and is drilled with round holes with a diameter of 3.5mm~5mm ~ 5 mm, and the hole spacing is about15 mm ~ 20 mm. The round holes are washed from the inside to the outside, and the inner wall is smooth, so as to prevent the fabric from being damaged during washing. There are several ribs on the inner wall of the drum along the axial direction, which play the role of lifting clothes in the washing process, so it is also called lifting ribs, with a length of 85 mm ~ 95 mm and a triangular cross section.

Basic structure of washing machine II. Structure introduction of operation part: The operation part is mainly composed of operation panel and front door. The operation panel is composed of operation skeleton (front panel), program signboard (front decorative panel), key switch, knob of program controller, knob of thermostat, indicator light and lever arm. The front door consists of a door inner ring, a door outer ring, a glass bowl, a sealing ring, a handle, a handle button, a handle hook, a handle bolt, a handle spring and a button spring.

Basic structure of washing machine. Structure introduction of support part: the upper part of double support is made of tension spring. One end of the tension spring is connected with the upper part of the box body, and the other end is connected with the washing outer cylinder, which not only plays the role of suspension, but also plays the role of shock absorption. The lower part adopts an elastic supporting device, one end of which is connected with the washing tub, and the other end is fixed on the washing machine base, which can play the roles of supporting and damping at the same time.

What are the washing machine structures that Bian Xiao brought you? This paper introduces all the contents of the basic structure of washing machine.