Solution of knotting method of garment belt bow

1. Arrange the belts on the clothes first and cross the two belts.

2. Pass the left strap around the other one from bottom to top.

3. After passing through, the belt will continue to be distributed to both sides, and the belt on the right hand side will be folded in half.

4. Pay attention when folding in half, and press the folded bag under another belt.

There is a hole in the back of the folded belt, and the other belt passes through this hole.

6. After passing through, the bow is finished and the two straps are adjusted.

: 1, wear a tie. First, put the bow-tie side of the clothes up and tie the tie on the clothes, as shown in the figure. Then, press the right bow tie to the left and the left bow tie to the right. 2. wear a tie. Wear the vamp lace from the inside, then tidy it up without creases, and then adjust it properly. ...

Spread the bow tie flat, divide it into two halves, put the short side under the long side, and let the two sides of the bow tie cross left and right. 2. Fold the pressed long end upwards, turn it once, and drill out downwards. 3. Hold down the intersection of the belt with your right hand to fix the belt, and fold the left belt into a small circle with your left hand and put it on. ...

Then, there are many ways to tie the hem of a T-shirt. The most common method is to cross-knot directly at the hem of the T-shirt. This knot is suitable for clothes that are not very long and simple. Although simple, but it seems capable and generous, girls with more capable personality may wish to give it a try. Another common one, of course, is the bow. ...