The toughened film of the mobile phone sticker has a poor seal. What should I do if it leaks?

The following are the film pasting steps:

Tools:

Mobile phone cleaning kit (including cleaning spray, cleaning cloth and small brush)

Toughened glass oxygen goggles mobile phone film (hacker myopia prevention film is recommended, which includes not only the front film and three-stage back film, but also auxiliary film tools such as electrostatic dust removal paste, special mirror cleaning cloth and adjustment paste, as well as imitation leather paper and anti-blue light test lamp to test the anti-blue light effect of the film. )

If there is no electrostatic precipitator, prepare electrostatic precipitator tape.

Steps:

1, clean the mobile phone screen thoroughly with the mobile phone cleaning kit before pasting the film (if it is a hacker tempered glass oxygen eye mask, you can clean the mobile phone screen with the attached special mirror cleaning cloth and dust removal sticker to ensure the screen is clean and dust-free).

2. Tear off the release film 1, align the film around the screen and the hole, and then gently stick it on the screen.

3. Press the middle position with your finger, and the film will automatically absorb the screen.

4. Wipe the screen with a dustproof cloth to make the film smoother and more docile.

Matters needing attention

When taking the tempered glass film, first tear off the back plate of the glass film, hold one end of the protective plate with your left hand, and slowly break off the other corner of the protective plate with your right hand. The process should be slow, and don't touch the side of the glass film attached to the screen of the mobile phone, so as not to leave stains on the glass film.