Carpentry making flooring installation method

Floor installation can be an important part of woodworking production, and how to do it correctly is something worth noting. Here, we will introduce you to the flooring installation method.

Installation steps:

1. Prepare tools and ground: first of all, you need to prepare the tools needed to install the floor, such as hammer, drill, distance meter, etc., and make sure that the ground is flat, no waves, no cracks.

2. Drawing the center line: mark the center line on the ground to ensure that the floor is installed on the line accurately, to avoid distortion and deformation.

3. Laying flooring sheets: Lay flooring sheets at opposite angles to ensure symmetry. Use the T-connection system to fix the floor panels together to facilitate the connection and adjustment of the floor panels.

4. Adjusting the floor panels: Start laying the floor panels from the centerline outwards. When the floor panels reach the corners or obstacles, the panels can be sawn to the right size to fit the obstacles. Then fix them together again.

5. Customization: Use tools such as saws to ensure that the flooring sheets fit perfectly and are perfectly aligned.

6. Cutting the flooring panels: If the flooring panels need to be cut, you may need to use the appropriate tools such as a saw.

7. Applying Plastic Stickers: Applying plastic stickers to the flooring panels helps to keep the flooring panels clean and eases the wear and tear of the flooring panels.

During the whole flooring installation process, you need to adjust accordingly to the state of the ground and flooring panels to ensure the quality and effectiveness of the installation. If required, tools such as woodworking glue and nails can be used to enhance the fixing of the flooring sheets.