What's the difference between photojournalism, airbrush, adhesive backing, PP, and car stickers?

Photo generally refers to the indoor use, it is the output of the screen is generally only a few square meters in size. Such as in the exhibition manufacturers use advertising small picture. Output models such as: HP5000, generally 1.5 meters of the maximum width. Photo machine using the media is generally PP paper, light film, ink using water-based ink. At the end of the output image has to be laminated, laminating boards to be considered a finished product, the output resolution can reach 300-1200DPI (different models will be different), it is more saturated colors, clear.

Airbrush generally refers to the output of outdoor advertising images, it is the output of the picture is very large, such as the highway next to the many billboard images is the result of the output of the airbrush. Output models are: NRU SALSA 3200, color God 3200, etc., generally 3.2 meters of the maximum width. Airbrush using the media are generally advertising cloth (commonly known as light box cloth), ink using oily ink, airbrush company to ensure the durability of the picture, the general picture color than the colors on the monitor to be a little deeper. Its actual output image resolution is generally only 30 - 45DPI (device resolution), the actual size of the picture is relatively large, there are hundreds of square meters of area.

Backing: high gloss, bright colors, high image resolution, the back of the self-adhesive, easy to paste, there are two kinds of matte and glossy.

PP: high gloss, bright colors, high image resolution, good anti-aging and tensile strength performance, matte and glossy two kinds.

Body sticker: the adhesive layer adds removable elements, strong adhesion, and easy to remove, does not leave any residual adhesive, waterproof and sunlight resistance. The precision of the picture can reach 1400DPI, and the life of the picture can be doubled by the film.