How to get the film out?

Take out the film from the camera as follows:

I. 135 camera:

1. First, put the finished film in the cassette.

The automatic camera will run automatically (after taking the 36th photo, the camera will make a "silk-"sound, which will last for tens of seconds, which means that the camera is automatically putting the film back into the cassette. )

Manual camera: turn the crank above the camera clockwise for one or twenty turns. When the crank suddenly loosens, stop turning immediately. At this point, the film has been poured into the film box, leaving only a little film head outside, which is convenient for the printing department to operate when developing.

2. Open the back cover of the camera.

3. Take out the tape. Note: Do not pull the film out of the film box. How much you pull out, how much you show. )

Second, 120 camera:

1. Shake the camera handle so that all the film protection paper in the camera can be poured on the other axis.

2. Open the back cover of the camera.

3. Take out the film.

4. Stick the film paper head firmly to prevent the film from being exposed and wasted due to loose film.