Steps and order of tools to sharpen nails

Steps and order of tools to grind nails

Steps and order of tools to grind nails, girls are very beautiful, the beauty of the nails can not be missed, repair and care of the nails in order to make the nails to keep neat and tidy, this is a way of life, the following for you to share the steps and order of tools to grind nails.

Steps and tools order of grinding nails 1

Tools / raw materials

Nail clippers, nail thwart, polisher, remove dead skin push, remove dead skin clippers, softeners, nutrient solution

Method / steps

First, nail clippers to cut the nails shorter, will be the nail file with the nails into an angle of about 45 degrees along a direction of sanding, because our nails themselves will have fibrous tissue exists, do not repeatedly back and forth sanding, to be along a direction

In the nails and the surrounding skin on the application of a little bit of softening agent, 5 minutes after the dead skin push from the bottom of the nail from the bottom to the top gently pushed upward to push off the excess cuticle dead skin, especially the top of the nails of the dead skin, deal with neatly It will make the nails look more beautiful

Use dead skin scissors to cut off the dead skin that was pushed off in the previous step, and be careful when dealing with this step to avoid scratching your fingers

Use the thick side of the polisher to polish the nails first, and repeat it back and forth in a semi-circular polishing angle way, without going in one direction because the polisher itself is not as rough as the nails are frustrated with. Sharp, there is a coarse side of the polish after the fine side (generally white) again semicircular polishing, this step after the end of you will be surprised to find that the nails are neat and shiny, very beautiful

The last indispensable step is to apply a nutritive oil to the nails and around the nails, repeated rubbing to make it absorbed, the nails play a role in protection

Trim the nails and dead skin. This is a necessary step before polishing the nails, to fix the necessary shape of the nail before polishing.

Steps for removing dead skin

Use a double-sided nail file to polish the nail surface that has been trimmed, where the side with smaller particles is used for smoothing, and the 'side' with smaller particles is used to smooth out the false surface.

Finally, clean the polished nails and apply nail polish, depending on your personal preference.

Steps and tools for grinding nails in order 3

Tutorial for making nails

Tools/raw materials

Manicure knives, scissors, nail files, dead skin removing steel pushes, dead skin nippers, sponge files, dust brushes, primer

Spotlight, Nail polish, sealer, cleaning solution

Methods / Steps

1, repair nail shape

The most important thing is to repair the nail shape of your own nails, or else do out of the manicure will not look good. Use a nail file to repair any unevenness around your nails.

2, push the dead skin

Nail repair, but also on the nails to remove the dead skin, the first use of the steel push, and then use the dead skin scissors cut off, so that the repair and good, but also will not hurt the nails.

3, cut the finger skin

Before repairing nails, be sure to deal with the barbs around the finger, otherwise it will affect the visual experience of nail art.

4, polish the nail surface

Use a sponge file to polish the surface of the nail, be sure to grind the nails, especially the back edge of the nails and nails in front of the location should not be ignored, but also to be polished and grinded neatly, once the grinding of the uneven, the nail polish will be very easy to fall off.

5, remove dust

Polished nails have a lot of dust, you can use the dust brush to deal with the dust on the top of all the removed, a little dust can not stay.

6, color

The nails are coated with primer, be sure to spread evenly, and then use the light therapy lamp on the light for 1 minute, so that the purpose is to make the nails and the nail polish better fusion together, and will not fall off. Then apply nail polish, the first time to be coated evenly, and to thin, do not apply too thick, repeated several times, and then use the phototherapy lamp to shine for about 2 minutes.

7, sealing layer

Coated with nail polish and then coated with sealing layer, coated twice on it, the first sealing layer when the light spa lamp 1 minute, and the second sealing layer, the light spa lamp 2 minutes.

8, clean

Wait until the two times after the sealer, you can use the cleaning solution to clean the surface of the nails, nail art is also done.