How to weave a red rope bracelet with a button knot?

1. Prepare the required materials and tools: jade thread, scissors, tape measure and lighter.

2. Cut a 170cm jade line first. Then fold the line (as shown in the figure below 1). The right line is about 30 cm longer than the left line (the left line is the left line and the right line is the right line). Then wrap a buttonhole around the crease (as shown in Figures 2, 3, 4 and 5), with a buttonhole diameter of about 0.7 cm.

3. Then tie a knot: Step 1: Make a circle for the right line from right to left and wrap the left line from bottom to top (as shown in the following figure 1); Step 2: The left line makes a circle from left to right and wraps the right line from top to bottom (as shown in Figure 2 below); Step 3: Tighten the thread (as shown in Figure 3 below).

4. Now let's weave the bird's head knot: Step 1: The right line makes a circle from right to left and wraps the left line from top to bottom (as shown in the following figure 1); Step 2: Draw a circle from right to left for the right line and a circle from bottom to top for the left line (as shown in Figure 2 below); Step 3, tighten the thread (as shown in Figure 3 below). Repeat knitting until the length is 6.5 cm (based on the size of 16cm), as shown in Figure 4 below.

5. Next, make a new button knot: Step 1: The right line goes around from right to left and presses the left line (as shown in the following figure 1); Step 2: Turn this circle up once (as shown in Figure 2 below); Step 3: The right line is fixed, and the left line is compiled as shown in Figure 3 below; Step 4: The left line is fixed and the right line is compiled as shown in Figure 4 below; Step 5: The right line is fixed, and the left line is compiled as shown in Figure 5 below; Step 6: Tighten the thread up and down (as shown in Figure 6 below). The total number of cattle knots is * * * to five (as shown in Figure 7 below).

6. Next, weave the bird's head knot until the size is 6 cm (as shown in the figure below 1). Then, after leaving 0.5 cm, weave a Niukou knot (as shown in Figure 2 below).

7. Cut the extra thread with scissors, and then light it with a lighter to make the extra thread stick to the button knot. At this point, this bird knot+cow knot red rope bracelet is completed.