Change jeans foot hem, how to keep the original edge

1 foot side of the car line position on the 1.5 centimeters at the cut, in determining the length of the pants to cut the foot side of the form of wrapped up, just in the seam location is too thick car to be careful. Pay attention to the side seam to side seam, wave bottom do not get it wrong.

2 sent to a professional tailor to ask the master for jeans leg edging.

Other way specific steps:

①from the front of the pants to the pants folded over;

②and then turn the buffed edge back;

③finish the trouser cuffs, with a ruler from the position on the chart to measure the full length of the pants, if the length of the pants is not suitable to adjust the trouser folded edge;

④with a large pin to the trouser edge to fix a little;

⑤sewing machine along the water polished edge inside, I drew the red line of the position of the sewing circle on the line;

⑥ pants ironed on the front side of the flat;

⑦ cut off the inside of the excess part of the edge of the package, with a needle to pick the fabric white part of the line is fixed, so that it can not be seen from the front.