How to make vase illustrations with DIY coke bottles

Diy Sprite bottles need 14 small steps to make vases. The specific method is as follows:

material

Sprite bottle, a pair of scissors

manufacturing method

1, Sprite bottle is cut into two parts as shown below.

2. Keep the upper part for later use.

3. Cut the lower paragraph evenly into eight parts at the incision, not too precise, but not too far. Don't cut it too deep, just an inch or so. It looks like the picture below after cutting.

4. Cut each copy as shown below, and cut a small piece like a shovel. Be careful not to cut below.

4. Cut the small pieces into leaf shapes.

6. Press the blade.

7. The effect after finishing.

8. Make the second block according to this method.

9 and 8 tablets are all made according to this method, as shown in the following figure.

10, also cut into leaves at a lower position, so there are two layers of leaves.

1 1. Treat the remaining pieces a little. In the picture below, they are cut into needle-like strips.

12, it's almost done after cutting. This work depends entirely on scissors, so be patient.

13. Insert the finished product into the upper part of the newly cut Sprite bottle.

14. If you want to arrange flowers in it, try to put the upper part in yourself.