Reasons for washing machine faucet leakage washing machine faucet leakage how to do

With the improvement of people's living standards, washing machines have entered thousands of households, whether it is a general washing machine, or automatic washing machine, in the use of the time you need to inject water through the faucet, washing machine faucet leakage phenomenon, a lot of people may have encountered, then what is the reason for the washing machine faucet leakage? Washing machine faucet leakage how to do? Here with the editor to take a look at it.

Washing machine faucet leakage how to do? First need to check which part of the reason, may wish to refer to the following points:

1, faucet stop tape problem. Washing machine faucet leakage, the usual problem is chained to the faucet part (fixing screws) of the water stop tape is damaged. Encountered this situation as long as the use of plate pliers will be removed from the faucet, in the place of the fixed screws to re-roll on the new water stop tape can be.

2, the faucet inside the shaft gasket wear problem. If the faucet will be tethered, or leakage may be the cause of leakage of the spout, generally due to wear and tear of the shaft gasket inside the faucet. In this case, you can use pliers to loosen and remove the gland lock, use the clamp to take out the shaft gasket, and replace it with a new shaft gasket.

3. The triangular gasket inside the gland is worn. In addition may be the gland within the triangular gasket wear caused by the lower part of the faucet hitch leakage. In this case, you can turn the screws loose to remove the head of the hitch, and then loosen the gland to remove, and then the inside of the gland triangle gasket out, replaced with a new one can be.

4, cover type nut loose problem. In addition, the cover type nut loose may also lead to take over the joint leakage, you can re-tighten the cover type nut or replace the new U-type gasket.

5, if you replace the entire faucet will leak. Some leaks have nothing to do with the faucet itself, may be due to improper installation of the water hose and faucet body. In addition, it may also be due to the water supply to the faucet water hose aging, unstable water pressure or corrosion and other problems. Once the water hose cracked, burst and other problems, the consequences can also be very serious. Therefore, experts recommend checking or replacing the water hose every 1-2 years or so.