What are the items on the dashboard of the car?

This indicator lamp is used to display the working status of ABS. When the key door is opened, the ABS light will turn on for a few seconds and then go out when the vehicle is self-checking. If it doesn't flash or go out after starting, it means that ABS is faulty.

[What can ABS do? ]

EPC indicator light

Common in Volkswagen brand models. When the key door is opened, the EPC light will light up for a few seconds, and then go out when the vehicle starts self-inspection. If the vehicle does not go out after starting, it means that the mechanical and electronic system of the vehicle has failed.

O/D gear indicator light

This indicator is used to display the working status of the automatic and overdrive gears. When the O/D gear indicator flashes, it means that the O/D gear has been locked. At this time, the acceleration ability is improved, but the fuel consumption will increase.

Seat belt indicator light

This indicator is used to show whether the seat belt is locked. When this light is on, it means that the seat belt is not fastened in time. Some models will have corresponding tips. When the seat belt is fastened in time, the indicator light will go out automatically.

Battery indicator lamp

This indicator lamp is used to display the use status of the battery. When the key door is opened, the indicator light will light up when the vehicle starts self-inspection. Automatically goes out after starting. If the battery indicator light is always on after starting, it means that there is something wrong with the battery and it needs to be replaced.

Oil indicator lamp

This indicator is used to display the engine oil pressure. Open the key door. When the vehicle starts the self-inspection, the indicator lights up and goes out after starting. The indicator light is always on, indicating that the oil pressure of this car is lower than the specified standard and needs maintenance.

Fuel indicator lamp

This indicator lamp is used to display the amount of oil stored in the vehicle. When the key door is opened, the oil indicator will light up briefly and then go out when the vehicle is self-tested. If the indicator lights up after starting, it means that the fuel in the car is insufficient.

Door indicator light

This indicator lamp is used to display the status of each door of the vehicle. If any door is not closed or closed, the corresponding door indicator light will be lit to remind the owner that the door is not closed. When the door is closed or properly closed, the corresponding door indicator light will go out.

Airbag indicator light

This indicator lamp is used to display the working state of the airbag. When the key door is opened and the vehicle starts self-inspection, the indicator light will automatically light up for a few seconds and then go out. If it is kept on, the airbag will fail.

Brake disc indicator light

This indicator lamp is used to show the wear of the brake disc of the vehicle. In general, the indicator light is off. When the brake disc has a fault or wear transition, the indicator light will light up and go out after repair.

Hand brake indicator light

This indicator lamp is used to display the state of the vehicle handbrake, which is usually closed. When the hand brake is pulled, the indicator light will light up automatically. Put down the handbrake and the indicator light will go out automatically. Some models will be accompanied by a warning sound if the handbrake is not put down during driving.

Water temperature indicator lamp

This indicator lamp is used to display the temperature of the coolant in the engine. When the key door is opened, it will light up for a few seconds and then go out. The water temperature indicator is always on, indicating that the coolant temperature exceeds the specified value and needs to stop driving immediately. Extinguish when the water temperature is normal.

Engine indicator light

This indicator lamp is used to display the working state of the vehicle engine. When the key door is opened, the indicator light will automatically light up and go out when the vehicle is self-tested. If it is on all the time, it means that the engine of the vehicle has mechanical failure and needs maintenance.

Turn signal indicator

This indicator lamp is used to display the position of the vehicle turn signal. Usually in the closed state. When the owner lights up the turn signal, the indicator light will light up the turn signal in the corresponding direction at the same time, and the indicator light will go out automatically after the turn signal goes out.

High beam indicator lamp

This indicator lamp is used to display the status of the vehicle high beam. Under normal circumstances, the indicator light is off. When the owner lights up the high beam, the indicator light will light up at the same time to remind the owner that the high beam of the vehicle is turned on.

Glass water indicator lamp

This indicator lamp is used to display the amount of glass cleaning liquid loaded in the car, and it is usually turned off. When this indicator light is on, it means that the glass cleaning liquid loaded in the car is insufficient and needs to be replenished. After adding glass cleaning liquid, the indicator light goes out.

Fog light indicator

The indicator lamp is used to display the working status of the front and rear fog lamps. When the front and rear fog lights are on, the corresponding signs of the indicator lights will also be on. When the fog lights are turned off, the corresponding indicator lights go out.

Width indicator lamp

This indicator lamp is used to display the working state of the vehicle width indicator lamp, which is usually off, and lights up when the width indicator lamp is on. When the width indicator is turned off or the headlights are turned on, the indicator will go out automatically.

Internal circulation indicator lamp

This indicator lamp is used to show the working state of the vehicle air conditioning system, which is usually in the off state. When the internal circulation button is turned on, the vehicle turns off the external circulation, and the air conditioning system enters the internal circulation state, the indicator light automatically lights up. Extinguish when internal circulation is closed.

VSC indicator lamp

This indicator lamp is used to display the working state of vehicle VSC (Electronic Body Stability System), which is common in Japanese cars. When this indicator light is on, it means that the VSC system has been shut down.

TCS indicator lamp

This indicator lamp is used to display the working state of TCS (Traction Control System) of vehicles, which is mostly found on Japanese cars. When this indicator light is on, it means that the TCS system has been turned off.

Fuel tank opening key

This button is used to remotely open the fuel tank cover in the car. For vehicles equipped with this button, the driver can open the fuel tank cover from the vehicle through this button. However, the closing of the fuel tank needs manual control outside the vehicle.

ESP on-off key

This button is used to turn the vehicle's ESP on and off. The vehicle's ESP system works by default. In order to enjoy a more direct driving experience, the owner can press this button to turn off the ESP system.

Reverse radar key

This button is used to turn on or off the reversing radar system on the car according to the needs of the owner. The driver can press this button to manually control the operation of the reversing radar. Turn off the reversing radar manually when reversing, or turn it on manually.

Central locking key

This button is the control button for the central door lock of the vehicle. The owner can open or close the lock of each door at the same time by pressing this button. You can also close the open door separately. Effectively ensure the safety of people in the car.

Headlight cleaning key

This button is used to control the automatic cleaning function of the headlamp. On vehicles equipped with headlight cleaning, the owner can turn on the headlight cleaning device by pressing this button and spray water on the headlights of the vehicle.

Rear sunshade key

This button is used to control the opening and closing of the automobile electric rear sun visor. In a car equipped with an electric rear sunshade, the owner can open or open the electric sunshade in the rear window by pressing this button. Used to keep out the sun