Introduction to the principle of manual tile cutting knife Manual tile cutting knife use

Manual tile cutting knife is generally used in manual tile cutting machine, because it is manually operated, so in the working process will not consume electricity, will not produce a lot of dust (this point is very important, because the cutting workers generally in the operation of the operation is a large amount of dust inhalation, which will have a great impact on the health), there is no noise, precision is also high, and the other must be described is simple to operate. In this day and age, work and quality of life are side by side, people often go after the efficiency of the work at the same time will also take health into account, because "the body is the capital of the revolution".

I. Introduction to the principle of manual tile cutting

The cutting principle is similar to that of a diamond glass cutter. The good and bad cutter directly affects the quality of the cut, manual cutting machine can straight line and arc cutting all kinds of tiles, glazed or unglazed interior and exterior wall tiles, floor tiles, three-dimensional tiles, ceramic panels, glass porcelain tiles and flat glass. Manual cutting machine to make the product cutter neat, low cost, no electricity, no cooling water, no noise, lightweight, easy to use and carry. In addition, the missing corners of the broken edge of the scrap brick can also be used to cut it into the waste into useful materials, reduce consumption, increase efficiency.

Two, the use of manual tile cutter

Step 1: Positioning line

The tile square in the baseboard, if necessary, please unfold the bracket, put down the handle so that the knife wheel and the surface of the ceramic tile in contact with the handle will be pushed forward gently so that the knife wheel in the surface of the ceramic tile cut a continuous and uniform straight line. A continuous and even straight line.

Step 2: Disconnect with downward pressure

Pull the handle backward quickly, and the tiles will be disconnected along the scribed line.

Third, the advantages of manual tile cutter

The traditional cutting tools are mainly electric cutter, handheld diamond knife and so on. Manual tile cutter is a green tool, compared with the traditional cutting machine, cutting a straight line, regardless of the cutting effect, cutting efficiency, cutting costs and so on have very big advantages.

Summarize the tiles cut well, cut neatly, mainly in the manual cutting machine tool hardness is not high, and secondly in the use of the demarcation line is uniform, clear. Often in the use of a very small pressure downward, very smooth to the front of the light push handle, you can draw a clear line in the location of the need to cut, the handle back after the tiles break along the line. Excessive force will cause the cutting line to become jagged, the cut will not be very smooth, resulting in a decline in the quality of the cut. When the size of the tile is large there is often a phenomenon that the tile breaks from the center, then you need to fix the tile to ensure that the contact surface is horizontal. Now environmental protection is more and more worthy of attention, more and more construction workers realize that dust and noise on their own health brought about by the serious hazards, so the use of manual cutter, in terms of health, safety has unparalleled advantages.