How to install washbasin pipeline installation skills of washbasin pipeline

The washbasin is one of the original bathroom parts commonly used in bathroom decoration. How to install the pipeline is a difficult problem. Let's take a look at the installation method of the pipeline.

First, the installation steps of washbasin

Step 1: Make the reserved position of the sewer under the washbasin as large as possible to avoid future blockage and difficult combing, and then distribute the sewer pipe from the washbasin hole. It's better to use a threaded one here, which can be more stable. Then wrap waterproof tape around the joint repeatedly, and pay attention to keep the appearance horizontal, and it is best to apply some glue, so as to ensure the tightness of the joint.

Step 2: Tighten the remaining nuts with the apron at the bottom of the washbasin and fix them again. Then, put the whole washbasin porcelain plate on the washbasin and put it neatly to ensure that the apron and nut appear in the center of the washbasin. If it is not uniform, it must be adjusted evenly. Because if there are some minor problems in the future, you won't know how to fix them.

Step 3: Screw the nut on the bottom of the washbasin, that is, between the apron and the porcelain panel, then put the other end of the sewer pipe under the floor drain, then check whether the washbasin is stable, put a little water in it, and observe whether there is water seepage at the interface and whether the nut is completely fixed. Then check whether there is any leakage in the whole process, complete it carefully, and adjust it immediately if there is any mistake.

Precautions for installation of washbasin sewer pipe: waterproof tape must be used at the interface, because if the tape is waterproof, it will soon crack and leak again. This is not worth the loss, it is time-consuming and laborious. Finally, it is important to clean up the residue as regularly as possible when using it. When choosing the sewer pipe of washbasin, the length should be reserved, about 20 cm. When selecting materials, it is best to choose pvc pipe, which is durable.

Second, the installation considerations

Note 1: Space determines the form. Wash basins are roughly divided into two types: independent and desktop. Beautiful independent style, small floor space, and easy to maintain, suitable for bathrooms with little space. However, a mirror box or washstand is needed, so that some washing utensils and cosmetics can be placed in the space above the pool. The desktop washbasin should occupy at least one small table. Its countertop can hold washing utensils, and the cabinet below can also hold sundries. If the bathroom area is not large, consider installing a triangular washbasin in the corner, and a triangular debris rack can be hung above the washbasin to store toiletries.

Note 2: Depth is directly proportional to strength. Splashing water on your body is probably the most uncomfortable thing for consumers.

Conventionally, the depth of the washbasin is directly proportional to the water flow intensity of the faucet installed on it, that is, the faucet with strong water flow can be installed in a deep pool. Never install a coarse faucet on a shallow pool, which will make people splash when using water. The bottom of the pool should have enough curvature, and it can't be peaceful, otherwise it will accumulate water. Note point three: height. Whether it is a stand-alone or desktop washbasin, the height of the basin surface or countertop from the ground should be 80-85 cm, because a pool that is too short will make people feel backache.

The above is the pipe installation method of washbasin, hoping to help you better complete the pipe installation.