How to maintain the lamps

1, correct installation. In the purchase of lamps and lanterns home, especially in their own installation, be sure to read the instructions first, which may not have anything to do with maintenance, but if not installed correctly, the lamps and lanterns can be very easy to break, and sometimes even explode, very dangerous, so special places, one is the bathroom, two is the kitchen. Bathroom: the lamp shall be equipped with moisture-proof lampshade, otherwise the service life will be greatly shortened; Kitchen: the lamp should pay special attention to anti-smoke, because the accumulation of grease and dirt will affect the illumination of the lamp; and choose a light-colored lampshade better light transmission, but easy to stick to the ash, to be diligent in wiping, so as not to affect the degree of penetration of the light.

2, timely replacement of aging lamps: the use of long lamps and lanterns we just a little attention can be noted that the ends of the lamp will be red, or black shadow this time to change in time. The purpose is to prevent ballast burnout and other unsafe phenomena.

3, the correct cleaning: now the city's dust is very large, the lamps and lanterns after a period of time, on which will be deposited on a thick layer of gray, affecting our vision, so we can not avoid the regular cleanup, then pay attention to the process of cleaning do not change the structure of the lamps and lanterns, do not replace the lamps and lanterns of the components, in the end of the cleaning and maintenance should be installed according to the original lamps and lanterns, do not omit to load, misinstallation of lamp parts. Lamp parts. Cleaning method:General lamps and lanterns with a dry cloth, and pay attention to prevent moisture invasion, if the lamps and lanterns for non-metallic, can be used to wipe the wet cloth, so as to avoid dust accumulation, hindering the lighting effect.

4, avoid frequent switching lamps and lanterns in use do not frequent switching, because the lamps and lanterns in the frequent start of the moment, through the filament of the current are greater than the current of the normal operation, making the filament temperature rises sharply accelerated sublimation, which will greatly reduce its service life, so try to minimize the switching of lamps and lanterns.