Treatment method of hidden door lock in family decoration

The carpenter did a good job. When he saw that the door was made into an effect diagram, he immediately encountered a problem: how to install this door lock? Go online to find the answer quickly. Entering "invisible door lock" on the Internet found that the whole page was full of questions raised by everyone, but there were few satisfactory answers to this question. So I buried my head in search and thought, and finally cleared my mind. Here I will tell you how to lock the invisible door.

First of all, introduce the invisibility door. Invisible doors can be divided into two ways, one is to make them look like sliding doors, which are connected with storage rooms and are often used to hide corridors, bathrooms and other places. If you use a sliding door, you may not need to lock it, so the problem of locking the door is not very big. The other is a door that can be opened and closed, often made into a shape that matches the wall surface, or pasted with the same wallpaper as the surrounding wall surface. The following is the appearance of common secret doors I collected.

Case study of netizen stealth door

Invisible door closer

How to install the lock to open and close the secret door?

I summarized the following four ways:

1, nothing on the side has reached the invisible effect, and the invisible effect is the best. If we want to achieve this effect, that is to say, the door must be pushed in and pushed directly by hand, then we should consider how to close the door when it comes out after it is pushed into the room. There are two ways to use it: one is to install a door closer on the back of the door (as shown in the figure). The function of the door closer is that when you push in, your hand will be released and the door closer will slowly close. I don't need you to pull it. In other words, this door is always closed. But some TX families want to be ventilated sometimes when the door is open. At this time, they need to buy a positioning door closer, that is, when the door is pushed above 90 degrees, it can automatically position and keep open. And it is best to install a door suction, which is said to be better for people who close the door. It's easier This solves the problem of pushing the door from the outside to the inside. Then in the case of opening the sliding door from the inside, it is necessary to install the handle on the invisible side. There is a special door handle. Note that unlike ordinary cabinet handles, those cabinet handles are fixed on the inside of the door panel, while there is nothing on the outside of our door, so we must be careful when choosing. However, if it is a bedroom with an ordinary door, we should consider a privacy issue, because it can't be locked without locking the door, so remember to install a hidden bolt in it. Of course, the bolts you installed are ok, but they are not beautiful. A blind bolt is similar to the safety of a general lock. When you turn it, the door closes. You can't drive outside. It may cause children or the elderly to accidentally lock themselves in. Generally speaking, the problem is not big. Outside the store, this hidden latch is often called "invisible door lock".

To sum up, if you want to make a door completely invisible from the outside, you can install a hidden bolt, a door closer, a handle (if you think it is ok to use the hidden bolt as the handle to open the door, you don't need to buy a handle) and a door suction (this can also be omitted). The advantage of this is that you can't see any locks from the outside, but you can't lock the door from the outside, only from the inside. It is more suitable for hiding the secret door of the bedroom. A good closer may be more expensive, but the hardware is worth a penny. I haven't compared it either, so it's hard to publish anything. When I went to the physical store, I saw a door hinge with a closed belt, but the price was seven or eight hundred, which I really could not bear. If you buy this kind of hinge with closing function, then you don't need a closer, which is more beautiful.

Install a contact ball

2. A handle is installed in front of the hidden door. It can be very small. It's not obvious In this case, there is no problem in pushing the door and closing the door from the outside, and there is no need to install a door closer. So is the back of the door. It can install a bolt and a door suction. But the problem is that after the door is closed, it may not be fixed. It is likely that a gust of wind will blow the door open, and naturally it will not achieve the invisible effect. At this time, you can consider buying a touch ball and installing it at the position of the door lock to achieve the effect of closing the door.

Touch beads

3. Lock the hidden door. Or lock as usual, in which case the invisibility effect may not be obvious. There are several options for this lock. One is the most common lock, and the other is the so-called invisible lock.

There is also a single-sided lock, also known as a dead lock. There is only a round hole on the hidden side, and a door handle similar to a hidden bolt on the other side.

These are some of my summaries. I believe that most people still hope that there is nothing on the front of the secret door, which is better to hide. That is the first method I have described in detail. I hope it will help everyone.