Plastic grommet ceiling installation diagram

Plastic ceiling installation diagrams:

1, determine the ceiling installation location

In the installation, we need to clarify its installation location and installation height, so that the installation will not be busy, in order to improve the efficiency of the installation. When we determine the installation height, we need to use the ink line in the surrounding wall line elevation, baseline labeling should be clear, and then we will determine the size and specifications of the plastic buckle plate according to the ceiling design, ceiling area. It should be noted that the ceiling installation should not be too low, if the ceiling is too low, it will make the space look depressing.

2, determine the keel position line

In the whole installation, because the keel plays a major role in the pillar, so then we need to determine the keel installation position. In the case of plastic buckle plate size has been determined, in order to ensure the integrity of the installation, we should be based on the panel specifications to determine the structural dimensions of the keel and the location of the line, and then determine the location of the line marked on the top of the baseline, to facilitate subsequent installation.

3, the installation of the main keel

When we install, we can not be greedy for the construction progress, ignoring the firmness of its installation. We need to adjust the suspension height of the boom while installing to control the leveling of the keel frame. When the main keel is roughly flat, we need to adjust some single keel with curved and warped edges until the flatness of the keel meets the requirements.

4, the installation of boom and side keel

We need to install the bar before it first rust treatment, in the installation, pay attention to the distance between it and the main keel can not be more than 300mm, otherwise you need to add the bar, it will be more trouble. Next we need to install the side keel, when the side keel installation is completed, we have to check the flatness and firmness of the keel to ensure the stability and service life of the ceiling.

Expanded:

Home improvement tips can be found in the following sections. p>Home improvement selection skills can be divided into four categories:

A, home improvement selection skills of wall materials and their selection

Wall materials commonly used latex paint, wallpaper, wall tiles, paints, panels, wall cloth, wall felt and so on.

1, wallpaper.

The market wallpaper to plastic wallpaper.

2, paint

Home furnishing commonly used paints are mainly the following categories:

(1) latex paint: the current market common Lipang paint, divided into high and low grade.

(2) low-grade water-soluble paint: common 106 and 803 paint.

(3) paste interior wall paint: imitation porcelain paint strengths are delicate surface, smooth as porcelain, and not powder, non-toxic, odorless, breathable, inexpensive.

(4) colorful spray: a spray can form a variety of colors pattern, pattern elegant and generous, three-dimensional sense.

Shuangqiaotou-modern two homes-Shuangqiaotou

3, decorative panels: home decorative panels have wall panels, wood wainscoting or cover panels, the materials used are plywood, stainless steel and plastic-plated panels, plastic panels, aluminum alloy panels, enameled panels, galvanized panels and so on.