Video tutorial of gas tank refitting barbecue oven

The video tutorial of gas tank refitting barbecue oven is as follows: video link

Step 1: Prepare materials and tools. First of all, you need to prepare the following materials and tools: an old gas tank, a wrench, a screwdriver, a hacksaw, an electric drill, a fireproof cloth, some barbecue nets, some iron wires and some charcoal fire for barbecue. Step 2: Clean the gas tank. Clean the gas tank to ensure that there is no oil stain and rust inside and outside.

2. Step 3: Cut the gas tank, and saw the gas tank in half with a hacksaw, with half as the bottom of the barbecue and the other half as the lid of the barbecue. In the process of cutting, pay attention to safety and avoid cutting your fingers. Step 4: Grind the gas tank. Grind the cut of the gas tank with sandpaper to prevent sparks from splashing during barbecue.

3. Step 5: Install the barbecue net. Install the barbecue net at the bottom of the gas tank and fix it with iron wire. A barbecue grill can be installed above the barbecue net for placing food. Step 6: Make a chimney and drill a hole in the gas tank cover with an electric drill to exhaust smoke. Then, put a long wire through the hole as a chimney.

Precautions for using gas tanks are as follows:

1. installation location: the gas tank should be installed in a well-ventilated place, away from fire sources and away from direct sunlight. At the same time, flammable and explosive articles cannot be piled around the gas tank. Check air leakage: Before using the gas tank, check whether there is air leakage in the gas pipeline. It can be detected by smelling and smearing soapy water. If leakage is found, the air valve should be closed immediately and repaired in time.

2. Use gas appliance: When using gas appliance, make sure that the joint with the gas tank is well sealed to avoid gas leakage. At the same time, gas appliance should be kept clean during use to avoid blockage. Regular inspection: the gas tank should be inspected regularly, including whether the appearance is damaged, whether the valve is normal, whether the gas pipeline is aging, etc.

3. Safety valve: There is usually a safety valve on the gas tank. When the gas pressure is too high, the safety valve will automatically open to release gas to prevent explosion. Therefore, do not adjust or close the safety valve at will. Storage mode: Gas tanks should not be stored for a long time, because gas will corrode metals and reduce the safety of gas tanks. If it needs to be stored for a long time, the gas in the gas storage tank should be emptied.