Bathroom squat toilet flush in which

Squatting toilet is cheaper than the toilet, its own if there is no big problem, at most, the flushing valve will be used for a long time, other aspects of the basic need for replacement. And bathroom safety tips, the toilet is more prone to clogging, the service life is generally about 10 years. Where is the toilet squat toilet flusher? I'll tell you about it!

General flusher just above the water inlet, play a role in giving pressure. Toilet squatting toilet pedal flusher installation method:

Ming installed, you just need to flush the stainless steel pipe buried after the water pipe according to the stainless steel pipe size on the line. Concealed installation, you need to pay attention to the reserved height of the water pipe wire elbow if the most commonly used 20 elbow pedal valve height should be left to the distance from the completion of the surface is greater than 15 centimeters (too high, not good-looking and not good to use too low, the pedal valve can not be installed) flush stainless steel pipe from the wall to complete the surface of the 2 centimeters on the line.

How to install a squat toilet in the bathroom?

1. According to the installation of the product's sewage outlet, in the appropriate location away from the wall to reserve downpipes, while determining the distance from the entrance of the downpipe to the ground plane.

2. Reserve the depth of the pit for installing the squatting toilet under the ground is greater than the height of the toilet.

3. Put the connecting plug into the water inlet hole of the squat toilet and tighten it. Apply a layer of glass glue or putty on the outer edge of the contact with the squatting toilet inlet hole, insert the water inlet pipe into the glue plug inlet hole, so that it is well sealed with the glue plug to prevent water leakage.

4. Apply a layer of glass glue or putty on the edge of the outlet of the squatting commode, put it into the inlet of the downspout and screw it, and use coke residue or other filler to set up the commode horizontally.

5. Open the water inlet system and check the joints for leaks. Until the problem is solved.

6. After checking that there is no leakage at each joint, fill the toilet around with filler, and at the same time, fill the contact surface of ceramic and cement mortar with elastic materials such as asphalt or linoleum for more than 1cm.

7. Use cement mortar to fix the squatting toilet in the horizontal plane, smooth and solid, and then pave the bathroom floor tiles on the cement surface.

8. Test flush, if there is no abnormality can be used.

Finally, I would like to introduce you to a kind of induction flusher. The application of infrared light reflection principle, people stand in front of the urinal, infrared light emitted by the infrared transmitter tube through the human body reflected to the infrared receiver tube, and then the signal is processed through the follow-up control solenoid valve open water. People leave the urinal, natural infrared light is not reflected, and then the solenoid valve is automatically closed.