Garage key matching method

The matching method of garage keys is as follows:

As long as you press the code check key on the back of the motor, you will see the indicator light coming on. Press a key on the old garage door remote control again. Press and hold for 5 seconds, and when you see the indicator light flashing all the time, you can release the button. After loosening, you will see that the indicator light goes out and the surface matching is successful.

How to pair the garage remote control with the remote control;

1. The model of the new garage door remote control to be prepared should be the same as that of the old garage door remote control.

2. Press and hold the two buttons on the new garage door remote control at the same time. When you see the red light on the remote control flashing all the time, you can release the button, indicating that the code clearing is successful.

3. Put the old and new garage door remote control together and press the button in the same position at the same time. If you see the red light flashing on the remote control, it means that this button has been successfully matched with the new remote control, so you can release the buttons of the two remote controls.

4. If it matches, press the key indicator light, and it will not light up once. This face did not match successfully and needs to be matched again.

5. Match the remaining garage door remote control one by one according to this method.

New matching method of garage door remote control code;

1, press and hold the door opener password key at the back of the motor for 2 seconds, and the indicator light will always be on.

2. Press the door key on the garage door remote control, and the indicator lights of the remote controller and door opener will light up every time. Press it four times in a row, and the indicator light will light up at the same time, indicating that the code alignment is successful.