How to make curtain box

Curtain boxes are made as follows:

Required materials: tape measure, ink line, cutting machine, wood, electric drill, etc..

1, we are in the installation of the curtain box is to prepare the first large core board and other man-made panels, but also need to prepare a tape measure, ink line, cutting machine, electric drill and other installation tools. Before construction, we need to check the ceiling is not flat and the ceiling dust and other clean.

2, we are installing the curtain box, to even understand the depth and width of the curtain box. The general depth of the curtain box is 10-15 centimeters, the width of the curtain box for double curtains is 12-15 centimeters. After understanding the size of the curtain box, we use a ruler to measure the corresponding width on the ceiling of the window and play the ink line to make the corresponding mark.

3, we use a tape measure to measure the length of the ceiling, which is usually the length of the curtain box. Next, we according to the length and width of the curtain box, mark the cutting position on the plate, and cut it with a cutting machine.

4, curtain box is usually U-shaped, we have to install the horizontal plate first. We will put the core board on the ceiling and use a wooden stick to hold it against, next use a drill and other tools to drive nails into the core board to fix it. After the liner is installed, everyone installs a panel, and the panel and liner should be installed with staggered seams.

5, the installation of stand-up boards first two stand-up boards through the nails fixed together, one end of the stand-up board to leave the thickness of the horizontal board of the same width. The next step we put the board aligned with the horizontal board, and use the drill to drive nails into the intersection of the board to fix it. After the riser board is installed, we install a panel on its surface and we are done.